MultiModemZPX User Guide | Appendix B - Updating Your Modem Firmware |
4.If the current firmware version is greater than the firmware version number found in Step 1: Identify the Modem Firmware, your modem has an older firmware version. Continue with Step 3: Download the Upgrade File.
Step 3: Download the Upgrade File
At
Step 4: Install the Flash Wizard
Install the Flash Wizard upgrade utility from the
1.Insert the
2.When the Autorun menu appears, click Utilities.
3.From the Select Utility Program dialog box, select Flash Wizard. Click OK.
4.The Welcome dialog box displays.
5.Before continuing with the firmware update, exit all Windows programs. Click Cancel to quit Setup if you need to close other Windows programs. Close any programs that are running and restart the update Wizard. When you are ready to proceed, click Next> to continue.
6.The Choose Destination Location dialog box displays. You may click Browse and select an- other folder if you do not want to use the default installation path. Remember the location of the destination folder; you’ll need to copy the firmware .Hex file to the same location before using the Flash Wizard to update your modem. Destination Folder _____________________
Click Next>.
7.When the program finishes copying files to your computer, the Setup Complete dialog box displays indicating that you must restart your computer before using the program.
8.Select Yes, then Finish to restart your system.
Note: You must restart your computer to finish the Flash Wizard installation
Step 5: Extract the Upgrade Files
1.When the system restarts, move the upgrade file (downloaded from the web site) to the Flash Wizard utility directory on your computer’s hard drive.
2.In Windows,
Step 6: Document Your Stored Parameters
Before you flash your modem it is important that you record the parameters that are currently stored in your modem so you can reprogram it after flashing.
1.Run your favorite terminal program.
2.In the program’s terminal window, type AT&V and press Enter to list your modem’s current parameters.
3.Record your parameters by saving the screens and sending them to your printer.
4.Close the terminal program.
Step 7: Upgrade the Modem’s Firmware
CAUTION: If you are using Windows NT, you must disable Windows RAS and Microsoft Fax Service before upgrading the modem’s firmware.
To disable RAS and your Fax service (Windows NT Only):
32