Multi-Tech Systems MT9234ZBA manual Technical Specifications, CE Mark

Chapter 1 – Introduction

Technical Specifications

The MT9234ZBA-Series modem meets the following specifications:

Trade Name	MultiModem® ZBA
Model Number	MT9234ZBA or MT9234ZBAV
Server-to-Client	56K speeds when accessing a V.90 or V.92 server
Client-to-Server	Up to 48Kbps when accessing a V.92 server
Client-to-Client	33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800 bps,
Data Rates	14400, 12000, 9600, 7200, 4800, 2400, 1200, 0-300 bps
Fax Data Rates	33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800
Voice Compatibility	TIA/EIA IS-101 (Voice Option only)
Data Format	Serial, binary, asynchronous
Modem Compatibility	ITU-T V.92, V.90, V.34 enhanced, V.34, V.32bis, V.32, V.22bis, V.22; Bell 212A and
	103/113; ITU-T V.21 & V.23; V.42, V.42bis, V.44.
Fax Compatibility	ITU-T “Super” Group 3; Class 1.0, 2.0, 2.1; T.4; T.30; V.21; V.27ter; V.29; V.34; V.17; and
	TIA/EIA Class 1, 2; TR29.2
Video Compatibility	ITU-T V.80 for H.324 video conferencing
Error Correction	ITU-T V.42
Data Compression	ITU-T V.44 (6:1 throughput)
Speed Conversion	Serial port data rates adjustable to 300, 1200, 2400, 4800, 9600, 19,200, 38,400, 57,600,
	115,200, and 230,400 bps
Mode of Operation	Fax online modes; full duplex over dial-up lines
Flow Control	XON/XOFF (software), RTS/CTS (hardware)
Intelligent Features	Plug and play; fully AT command compatible; dialing options, autoanswer; adaptive
	answer; EIA extended automode; adaptive line probing; automatic symbol and carrier
	frequency during start-up, retrain, and rate renegotiation; DTMF detection; call status
	display, auto-parity and data rate selections; keyboard-controlled modem options; non-
	volatile memory; remote configuration; DTR dialing; callback security; A-law support in
	56K modes; 11-bit support; real-time fax compression conversion; U.S. Caller ID
	reporting; quick-connect startup (V.92).
Command Buffer	40 characters
Transmit Level	-12 dBm (Eruo/NAM) – varies by country/region setting
Frequency Stability	±0.01%
Receiver Sensitivity	-43 dBm under worst-case conditions
AGC Dynamic Range	43 dB
Interface	TIA/EIA RS-232C/ITU-T V.24/V.28
Connectors	DB25F RS-232C connector; 2 RJ-11 telephone jacks; power jack
Cables	Country-specific telephone; power cables; serial cable.
	Note: Any cables connected to the computer should be shielded to reduce interference.
Diagnostics	Power-on self test, local analog loop, local digital loop, remote digital loop.
Indicators	LEDs for Transmit Data, Receive Data, Carrier Detect, Off Hook, Terminal Ready, Power.
Speaker	Internal speaker for call progress monitoring.
Operating	0°– 50° C (32°–120° F) ambient under closed conditions;
Temperature	humidity range 20–90% (non-condensing)
Power Requirements	Global modems: 100–240 VAC, 50/60 Hz universal power supply
Power Consumption	9 VDC, 300 mA maximum
Approvals	CE Mark
	EMC: FCC Part 15 Class B, EN55024, EN55022 Class B, ICES-003 Class B
	Safety: UL/cUL 60950-1, IEC 60950-1, AS/NZS 60950
	Telecom: 47CFR Part 68, CS03, TBR21, other countries also included
Dimensions	10.8 cm wide x 14.8 cm long x 2.9 cm high (4.25" x 5.8" x 1.15")
Weight	224 g (8 oz)
Limited Warranty	2 years

Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387D) 5