Multi-Tech Systems MTA128NT, MTA128ST U Interface

Introduction and Description

U Interface

The U interface uses a 2-conductor twisted pair cable terminated with an RJ-45 jack. An RJ-45 jack located on the terminal is used to connect the terminal to the Digital Subscriber Loops using this twisted pair cable.

In Table 2-2 the Pin Number, Terminal Pin Signal Name and UILC Pin Signal Names for the U interface are listed.

Pin
1	NA
2	NA
3	NA
4	Positive Input
5	Negative Input
6	NA
7	NA
8	NA

MTA128ST/NT 7