Multi-Tech Systems MVPGSM-2 manual Custom Fields Definitions, Field Description, From Details

Chapter 4: Configuring your MVPGSM

The SMTP Parameters dialog box has a secondary dialog box, accessed by the Select Fields button, that allows you to customize email logging. The MultiVOIP GSM software logs data about many aspects of the call traffic going through the MultiVOIP GSM. The Custom Fields screen lets you pick which aspects will be included in the email log reports.

	“Custom Fields” Definitions
Field	Description	Field
Select All	Log report to	Start Date,
	include all fields shown.	Time
Channel	Channel carrying call.	Call Mode
Number
Duration	Length of call.	Packets
		Received
Packets Sent	Total packets sent in call.	Bytes
		Received
Bytes Sent	Total bytes sent in call.	Coder
Packets Lost	Packets lost in call.	Prefix
		Matched
Outbound	The DTMF dialing digits received by this	Call Type
Digits	gateway from the remote gateway
Received	presuming that DTMF is set to "Out of
	Band."
Call Status	Successful or unsuccessful.	DTMF
Call Direction	Indicates originating party.	Capability
Server	The IP address of the traffic control
Details	server (if any) being used will be
	displayed here if the call is handled
	through that server.
Disconnect	Indicates whether the call was	Outbound
Reason	disconnected simply because the	Digits Sent
	desired conversation was done or
	some other irregular cause occasioned
	disconnection (e.g., a technical error or
	failure). Values are "Normal" and
	"Local" disconnection.
	From Details
Gateway	Originating gateway	Gateway
Name		Name
IP Address	IP address where call originated.	IP Address
Description	Identifier of site where call originated.	Description
Options	When selected, log will record Silence	Options
	Compression and Forward Error
	Correction by call originator.

Description

Date and time the phone call began.

Voice or fax.

Total packets received in call.

Total bytes received in call.

Voice Coder /Compression Rate used for call will be listed in log.

When selected, the phonebook prefix matched in processing the call will be listed in log.

Indicates the Call Signaling protocol used for the call.

Indicates whether the DTMF dialing digits are carried "Inband" or "Out of Band." It can display either "Out of Band RFC2833" or "Out of Band SIP INFO" to indicate the out-of-band condition or "Inband" to indicate the in-band condition.

The dialing digits sent by this gateway to the remote gateway presuming that DTMF is set to "Out of Band."

To Details

Completing or answering gateway

IP address where call was completed or answered.

Identifier of site where call was completed or answered.

When selected, log will record Silence Compression and Forward Error Correction by party answering call.

Multi-Tech Systems, Inc. MVPGSM 42