MT202TD User Guide
Chapter 2 - Installation and Connection
Introduction
The installation of the MT202TD consists of setting DIP switches to the appropriate settings and then making the serial, phone line, and electrical power connections.
Power
Power is supplied to model MT202TD through an AC power transformer. The transformer supplies low voltage DC to the modem and plugs into any conventional 117 VAC, 60 Hz, power outlet.
Warning: Use only the power transformer supplied with the modem. Use of any other transformer could cause damage to the modem.
Safety Warnings
λ
λ
λ
λ
λ
λ
Never install telephone wiring during a lighting storm.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
This product is to be used with UL- and
Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Avoid using a telephone (other than a cordless type) during an electrical storm. There is a remote risk of electrical shock from lightning.
λDo not use the telephone to report a gas leak in the vicinity of the leak.
λTo reduce the risk of fire, use only 26 AWG or larger telecommunication line cord.
8
