PAGE 12 — GAW-135H DC WELDER/AC GENERATOR — OPERATION MANUAL — REV. #0 (06/23/04)
■
Backfeed to a utility system can cause
electrocution
and or
property damage. NEVER connect the generator to a
building's electrical system without a transfer switch or other
approved device. All installations should be performed by a
licensed electrician
in accordance with all applicable laws
and electrical codes. Failure to do so could result in electrical
shock or burn causing serious injury or even death!
DANGERDANGERDANGERDANGERDANGER:GAW-135H — RULES FOR SAFE OPERATION
Emergencies
■
ALWAYS know the location of the
nearest
fire extinguisher
.
■
ALWAYS know the location of the nearest
first aid kit
.
■
In emergencies
always
know the location of the
nearest phone or
keep a phone on the job site
.
Also know the phone numbers of the nearest
ambulance
,
doctor
and
fire department
. This
information will be invaluable in the case of an
emergency.
DANGERDANGER
DANGERDANGER
DANGER
NEVER insert any objects into the output receptacles
during operation. This is extremely dangerous. ALWAYS
turn-off the generator and place all circuit breakers in
the “OFF” position when contact with
the output receptacles is required.
There exist the possibility of

electrocution, electrical shock or

burn, which can cause severe

bodily harm or even death

!
NEVER grab or touch a live power cord
with wet hands, the possibility exist of
electrical shock, electrocution, and
even

death!

DANGERDANGER
DANGERDANGER
DANGER
Never use damaged or worn cables
when connecting equipment to the
generator. Make sure power connecting
cables are securely connected to the
generator’s output receptacles, incorrect connections
may cause damage to the generator and electrical shock.
DANGERDANGER
DANGERDANGER
DANGER