PAGE 26 — GAW-135H DC WELDER/AC GENERATOR — OPERATION MANUAL — REV. #0 (06/23/04)
Stopping The Engine
Normal Shutdown
1. Place the
main circuit breaker
(Figure 11) in the OFF
position.
2. Remove the load from the generator, and let the engine
run at idle for 3-5 minutes with the idle control switch in
the ON position (Up)
3. Place the
engine ON/OFF
(Figure 24) in the OFF
position.
4. Place the engine
fuel valve lever
(Figure 25) to the "OFF"
position.”
Emergency Showdown
1. Place the
engine ON/OFF switch
(Figure 24) in the OFF
position.
Figure 24. Operation Switch (Stop)
Figure 25. Engine Fuel Valve Lever (OFF Position)
GAW-135H — INITIAL START-UP/GENERATOR OPERATION