Blades
NOTE
Blades should be changed when they fail to
Specification and part number finish concrete in a satisfactory manner. are subject to change without
notice.
J-SERIESTROWEL — OPTIONS
Clip-On Float Blades (Optional)
These blades will clip (Figure 34) on to an existing installed blade, allowing your finisher to float on “wet” concrete so that the troweling operation can begin as early as possible. They are easily removable, so that after the floating operation, when the concrete is sufficiently cured, they can be removed to expose the finish blades for continued troweling.
Blades are a vital part of finishing concrete. This Whiteman finisher has been designed to finish concrete and are built to stringent quality standards out of the finest trowel steel. If you need replacement blades, consult your parts list in this manual for part numbers and order them from your Multiquip parts dealer or importer.
Combo Blades
This trowel was equipped with combination FLOAT/FINISH (Figure 32) blades as original equipment. These blades have been designed for optimum performance in both the floating and finishing operations. These blades are versatile and should take care of most troweling needs.
Figure 34. Clip-On Float Blade
Float Discs (Optional)
These round discs (Figure 35) attach to the spiders and allow the machine to “float” on “wet” concrete. The disc design allows early floating and easy movement from wet to dry areas.They are also very effective in embedding large aggregates and surface hardeners.
Figure 32. Combination Blade
Finish Blades (Optional) |
| |
These blades (Figure 33) have been specifically designed for | Figure 35. Float Disk | |
finish operations with this trowel. They will provide a premium | ||
| ||
surface finishing capability from your trowel. They should only be |
| |
used after the concrete has set to the point where the trowel does |
| |
not sink into the concrete when placed on it. |
|
