MC-42S CONCRETE MIXER — MAINTENANCE (MIXER)

Ball Socket and Clamp Face Maintenance

1.If the towing vechicle is equipped with a ball socket, smear socket periodically with multi-purpose grease. This will keep the ball socket well lubricated.

2.Periodically oil pivot points and clamp face surfaces of coupler with SAE 30 WT. motor oil.

2.Use Poleyrex EM (Exxon Mobil) or equalivant lubricant. Clean grease fitting, apply grease gun to fitting (1/2 shot). Remember too much grease or injecting grease too quickly can cause premature bearing failure. Slowly apply the recommended amount of grease, taking a miniute or so to apply.

3.When parking or storing your mixer. Keep the coupler off the ground so dirt will not build up in the ball socket.

Grease Fittings (Zerk) Maintenance (Mixer)

There are 3 grease (Figure 26) fittings that will require lubrication. Lubricate these fittings once a week. Use lithium base grease, grade N0.1.

Figure 26. Grease Fittings Mixer

Grease Fittings (Zerk) Maintenance (Electric Motor)

1.There are two grease (Figure 27) fittings at each end of the electric motor that will require lubrication. Lubricate these fittings about every 16 months.

Wheel Bearings

1.After every 3 months of operation, remove the hub dust cap and inspect the wheel bearings (Figure 28). Once a year, or when required, disassemble the wheel hubs remove the old grease and repack the bearings forcing grease between rollers, cone and cage with a good grade of high speed wheel bearing grease (never use grease heavier than 265 A.S.T.M. penetration (“No. 2.”)

Figure 28. Wheel Hub and Bearings

2.Fill the wheel hub (Figure 28) with grease to the inside diameter of the outer races and also fill the hub grease cap. Reassemble the hub and mount the wheel. Then tighten the adjusting nut, at the same time turn the wheel in both directions, until there is a slight bind to be sure all the bearing surfaces are in contact.

Then back-off the adjusting nut 1/6 to 1/4 turn or to the nearest locking hole or sufficiently to allow the wheel to rotate freely within limits of .001" to .010" end play.Lock the nut at this position. Install the cotter pin and dust cap, and tighten all hardware.

Mixer Cleaning

 

1.

For thorough mix and longer drum life, always wash drum

 

 

out after each use.

Figure 27. Grease Fittings Electric Motor

2.

NEVER! pour or spray water over the engine or electric

 

motor.

 

 

PAGE 26 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #8 (12/16/05)

Page 25 Page 27
Page 26
Image 26
Multiquip manual MC-42S Concrete Mixer Maintenance Mixer
Page 25 Page 27

MC-42S specifications

The Multiquip MC-42S is a powerful and versatile concrete saw designed for both professional contractors and construction enthusiasts. This robust machine embodies a perfect blend of performance, durability, and ease of use, making it an excellent choice for a wide range of cutting applications, including asphalt, concrete, and masonry.

One of the standout features of the MC-42S is its dependable engine. Powered by a Honda GX390 gasoline engine, this saw delivers a peak performance of 13 horsepower, ensuring efficient cutting through tough materials. The engine is not only robust but also designed for fuel efficiency, which is essential for long working hours on the job site.

The MC-42S features an adjustable height handle that allows operators to easily control the cutting depth. This ergonomic handle enhances user comfort while reducing fatigue during prolonged use. The saw is equipped with an innovative bellows-style dust cover that minimizes dust production during cutting, keeping the job site cleaner and safer for everyone.

Another significant characteristic of the MC-42S is its cutting depth capability. With a maximum cutting depth of 14 inches, it’s suitable for a variety of cutting tasks, from shallow cuts to deeper trenches. This versatility allows users to tackle different projects without the need for multiple tools.

The saw features a heavy-duty frame constructed from high-strength materials, which enhances its durability and stability even during the most demanding tasks. Additionally, it comes equipped with large, robust wheels for easy mobility across job sites. This transportability ensures that operators can easily move the saw from one location to another without hassle.

Multiquip has integrated advanced technologies into the MC-42S, including a built-in water supply system that helps to cool the blade during operation. This system not only prolongs the life of the blade but also helps in minimizing the release of concrete dust, making it an environmentally friendly choice.

Finally, the MC-42S is designed for easy maintenance, with accessible components that make servicing straightforward. This feature ensures that the saw remains operational and reliable, minimizing downtime on the job.

In conclusion, the Multiquip MC-42S stands out as a premier option for those in need of a reliable and effective concrete saw. Its powerful engine, user-friendly design, efficient dust control system, and high cutting depth capabilities make it a favored choice across various construction and masonry applications.
Top Page Image Contents