Operation

CAUTION - Safety Rules

Make sure to follow all safety rules referenced in the safety sectionofthismanualbeforeoperatingcompactor. Keepwork area clear of debris and other objects that could cause damage to the compactor or bodily injury.

1.Once the engine has started, move the engine throttle lever quickly to the fast position.

2.With the throttle lever in the fast position, the engine speed should be around 2,300 RPM, therefore engaging the cen- trifugal clutch.

Always move the throttle lever quickly without hesitation, because

NOTE increasing the engine speed slowly causes the clutch to slip.

3.Firmlygaspthecompactor'shandlebar withbothhands,the compactor will begin moving forward.

4.Slowly walk behind the compactor and be on the lookout for anylargeobjectsorforeignmatterthatmightcausedamage to the compactor or bodily injury.

MVC-40G — OPERATION

5.Compactortravelingspeedmaydroponsoilswhichcontain clay, however there may be cases where traveling speed drops because the compaction plate does not leave the ground surface easily due to the composition of the soil.To rectify this problem do the following:

zCheck the bottom plate to see if clay or equivalent material has been lodged in the plate mechanism. If so, wash with water and remove.

zRemember the compactor does not work as efficiently on clay or soils that have a high moisture content level.

zIf the soil has a high moisture level, dry soil to appropriate moisture content level or carry out compaction twice.

MVC-40G PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #4 (06/06/07) — PAGE 19

Page 19
Image 19
Multiquip manual MVC-40G Operation