HTH — CONTROLS AND INDICATORS

27.Oil Filter – Provides oil filtering for the engine.

28.Retardant Spray Motor – Used with the spray control button.

29.Retardant Spray Tank - Holds 5 gallons of retardant or water.

30.Battery - Provides +12V DC power to the electrical sys- tem.

31.Hydraulic Suction Filter - Filters hydraulic fluid prior to entering the system.

32.Hydraulic Return Filter - Filters hydraulic returning to reservoir.

NOTE

Read this entire instruction manual completely before attempt- ing to operate this machine.

The following section is intended as a basic guide to the ride-on trowel operation, and is not to be considered a complete guide to concrete finishing. It is strongly suggested that all operators (experienced and novice) read “Slabs on Grade” published by the American Concrete Institute, Detroit Michigan.

HTH-8 FT. RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (02/22/11) — PAGE 17

Page 17
Image 17
Multiquip N/A manual HTH Controls and Indicators