QP-301TH — BASIC ENGINE

Figure 3. Engine Controls and Components

INITIAL SERVICING

6.

Choke Lever – Used in the starting of a cold engine, or in

The engine (Figure 3) must be checked for proper lubrication and

 

cold weather conditions. The choke enriches the fuel

 

mixture.

filled with fuel prior to operation. Refer to the manufacturers engine

 

7.

Air Cleaner – Prevents dirt and other debris from entering

manual for instructions & details of operation and servicing. The

engine shown above is a HONDA engine, operation for other

 

the fuel system. Remove wing-nut on top of air filter

types of engines may vary somewhat.

 

cannister to gain access to filter element.

1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

DANGER

Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the

engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry.

2. Throttle Lever – Used to adjust engine RPM speed (lever advanced forward SLOW, lever back toward operator FAST).

3. Engine ON/OFF Switch – ON position permits engine

 

starting, OFF position stops engine operations.

4.

Recoil Starter (pull rope) – Manual-starting method. Pull

 

the starter grip until resistance is felt, then pull briskly and

 

smoothly.

5.

Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop

 

the flow of fuel.

Operating the engine without an air filter, with a damaged air filter,

NOTE or a filter in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

8. Spark Plug – Provides spark to the ignition system. Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) Clean spark plug once a week.

9. Muffler – Used to reduce noise and emissions.

WARNING

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER

operate the engine with the muffler removed.

10. Fuel Tank – Holds unleaded gasoline. For additional information refer to engine owner's manual.

PAGE 14 — QP-301TH TRASH PUMP — PARTS MANUAL — REV. #4 (10/05/05)

Page 14
Image 14
Multiquip manual QP-301TH Basic Engine, Initial Servicing

QP-301TH specifications

The Multiquip QP-301TH is a state-of-the-art portable generator designed to meet the diverse power needs of contractors, professionals, and outdoor enthusiasts. Known for its durability, performance, and reliability, this model is a popular choice in the generator market, especially among those requiring consistent and efficient power supply.

One of the main features of the QP-301TH is its robust engine. It is powered by a reliable Honda GX390 engine known for its fuel efficiency and low emissions. This engine offers a starting wattage of 3000 watts and a running wattage of 2400 watts, which is ideal for powering tools, small appliances, and equipment. The generator’s design allows for 120-volt output, providing versatility for various applications.

The QP-301TH also boasts a user-friendly control panel that simplifies the operation. It includes clearly labeled outlets, such as two 120V GFCI outlets and one 120V twist-lock outlet, ensuring easy connectivity to electrical devices. The generator is equipped with an electric start system, facilitating effortless ignition, which is particularly helpful in emergency situations or when the generator is needed quickly.

Portability and convenience are key characteristics of the QP-301TH. Weighing approximately 190 pounds, it features built-in wheels and a comfortable handle that make transport and maneuvering straightforward, making it a practical choice for job sites, camping, or tailgating.

Moreover, the generator incorporates several advanced technologies to enhance performance and safety. The low-noise operation, a hallmark of Multiquip generators, ensures a quieter working environment, while the automatic shut-off feature protects the engine from damage in case of low oil levels.

The protective frame provides durability and safeguards the generator against accidental impacts. It is also designed to withstand various weather conditions, making it suitable for outdoor use.

Overall, the Multiquip QP-301TH stands out due to its combination of power, efficiency, and portability. Its user-centric design and advanced safety features make it a desirable choice for those looking for a dependable generator to handle their energy needs. Whether for professional use or recreational activities, the QP-301TH is a reliable power solution.