Multiquip QP3TH manual 1992100011, 1992100020, 1992100173, 1992000110, 1992100742, 1247100250

				PUMP ASSEMBLY
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	1992100011	CASING	1
2	1992100020	CASING COVER	1
3	13910001600014	SUCTION COVER	1
4	1992100173	DRAIN COVER	1	REPLACES P/N 1992100171
5	19920002200014	DRAIN COVER HANDLE	4
6	1992040033ASSY	IMPELLER KIT	1	INCLUDES ITEMS W/#
7	1992000110	VOLUTE CASING	1	REPLACES P/N 1992000133
8	1992100742	SUCTION PLATE	1
9	1247100250	DRAIN COVER SET HANDLE	2
10	1992330410	SUCTION PLATE PACKING	1
11	1992250700	WEAR PLATE	1
12	0105090820	BOLT(CASING COVER), M8 X 20	4
13	07904330300014	NIPPLE, NPS3" X NPT3"	2
14	1378350350	CHECK VALVE	1
15	0105091045	BOLT (ENGINE), M10 X45	4
16	43130006000014	CASING COVER PLATE	1
17@	0483602250	O-RING (DRAIN COVER)	1
18	0489403400	O-RING (CASING), 4 X 340 MM	1
19	1992214010P002	BASE, SS400	1
20	0481310800	O-RING (NIPPLE)	2
21#@	0482200240	O-RING, IMPELLER, MECH SEAL	2	SEE NOTE BELOW
22	19922140200014	ENGINE BASE, SS400	1
23	0631211159	FLOODING CAP, PF1-1/2"	1
24	0631211159	DRAIN CAP, PF1-1/2"	1
25@	0803442930	MECHANICAL SEAL	1
26@	0811885446	MECHANICAL SEAL SLEEVE, DIA. 30MM	1
27@	0852834525	ADJUST LINER DIA. 45 X 25.4 MM TO.3	1
27-1@	0852854525	ADJUST LINER DIA. 45 X 25.4 MM T0.5	1
28	0191170625	BOLT(IMPELLER), 3/8 X16 UNF X 25	4
29	0131190823	SCREW (VOLUTE CASING) M8 X 22	4	REPLACES P/N 0141090820
30	0141090825	SCREW (DRAIN CVR. SET HANDLE) M8 X 25	4
31	0131191290	CAP SCREW (CASING), M12 X 90	1
32	0131191235	CAP SCREW (CASING), M12 X 35	4
33	0105091040	BOLT (PUMP), M10 X 40	2
34	0459220120	SEAL WASHER (CASING) M12	1
35	0723302040	CUSHION RUBBER, 40 X 20 M10	4
36#	0458220100	SEAL WASHER, IMPELLER	1
37#	0191190750	BOLT IMPELLER	1

NOTICE

Item 21, o-ring, is included in impeller kit, item 6. When ordered as part of the kit, quantity of o-ring is one. Replacement of impeller requires two o-rings, so it is necessary to order one additional o-ring.

QP3TH TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #8 (01/29/14) — PAGE 31