STORAGE
Storage
Proper procedure for long term storage of the SURFACE GRINDER will protect it against the effects of corrosion and damage. If the SURFACE GRINDER is not to be operated for a period of 30 days or more, proceed to store as follows:
1)Clean all accumulated foreign material from the SURFACE GRINDER utilizing an appropriate safety solvent.
CAUTION
Observe all applicable safety precautions for the solvent.
2)Check all visible parts for wear, breakage or damage. Order any part not required to make the necessary repair.This will avoid a needless delay when operating the SURFACE GRINDER at next use.
3)Apply a dry film lubricant to all exposed metal components to prevent the formation of rust.
4)Store the SURFACE GRINDER inside. If the SURFACE GRINDER must be stored outside, protect it with a suitable covering.
SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 37
