Multiquip SHS81A manual Re-attaching Cover Guard

SHS81A CUT-OFF SAW — MAINTENANCE

Reversing the Cutting Arm Procedure (continued)

Reverse the cutting arm 180 degrees as shown in the Figure 23, and re-tension the V-belt by turning the belt tensioning

cam .The V-belt should remain in tension.

Fully tighten the three nuts Nthat lock the V-belt into the proper tensioning position.

Figure 23. Reversing the Cutting Arm

Re-attach the cover guard Kwith the 2 cap screws J, and reconnect the guard adjustment knob I.

Figure 24. Re-attaching Cover Guard

PAGE 24 — SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08)