MQ STREET PRO 1 CE SAW — MAINTENANCE

MAINTENANCE

See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems.

General maintenance practices are crucial to the performance and longevity of your saw. The extreme environments of sawing operations require routine cleaning, lubrication, belt tensioning, and inspection for wear and damage

The following procedures devoted to maintenance can prevent serious saw damage or malfunctioning.

DANGER

Some maintenance operations may require the engine to be run. Ensure that the mainte- nance area is well ventilated. Exhaust con- tains poisonous carbon monoxide gas that can cause of unconsciousness and may re- sult in DEATH.

WARNING

Before servicing or inspection, ALWAYS park the saw on a level surface with the blade removed, and the handlebar En- gine ON/OFF switch & Engine ON/OFF switch in “OFF” position.

CAUTION

ALWAYS allow the engine to cool before servicing. NEVER attempt any maintenance work on a hot! engine.

Saw Blade Removal and Installation

See page 19.

General Cleanliness

Clean the machine daily. Remove all dust and slurry build up. If the saw is steam cleaned, ensure that lubrication is accom- plished AFTER steam cleaning operations.

Chassis Lubrication

Spindle Bearings - Two zerk fittings are located up under the lower-front of the saw. Lubricate before daily use. Use a good quality extreme pressure grease. Check and lubricate more often if unit is under heavy use. Do not overfill bearings. Overfilling can damage the grease seals. This can result in bearing exposure to dirt and contaminants which can then shorten the life of the bearings. Excess grease can also drip onto the cutting surface.

Drive Belt

Refer to page 16 of this manual for Drive Belt adjustment procedures and Removal and Replacement procedures.

CAUTION

ALWAYS ensure that both ENGINE ON/ OFF switches (on the handlebar and on the engine) are in the "OFF" position, and that the spindle has COMPLETELY STOPPED ROTATING before performing any of the the following operations:

REMOVING or INSTALLING blades

ADJUSTING front or rear pointers

LUBRICATING any components

REMOVING engine mounting bolts

INSPECTING, ADJUSTING, OR

REPLACING drivebelt, spindle, spindle bearings or ANY engine part

REMOVING blade or belt guards

General Engine Care

Engine check:

Check daily for any oil and/or fuel leakage, thread nut & bolt tightness, and overall cleanliness.

Engine air filter:

Replace air filter if dirty. See Engine Owner’s Manual for detailed information.

Engine oil:

Check daily. Inspect with blade removed and saw frame level on a level surface. Keep the oil clean, and at the proper servicing level (Figure 7). DO NOT OVERFILL! SAE 10W- 30 of SG is recommended for general use.

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 27

Page 27
Image 27
Multiquip SP1CE13H18 manual MQ Street PRO 1 CE SAW Maintenance

SP1CE13H18 specifications

The Multiquip SP1CE13H18 is a robust and highly efficient concrete saw designed for both professional and industrial applications. Its state-of-the-art features make it a preferred choice among contractors for cutting through tough materials like asphalt, concrete, and stone.

One of the standout characteristics of the SP1CE13H18 is its powerful engine. Equipped with a reliable Honda GX390 gasoline engine, this concrete saw delivers an impressive output, ensuring optimal performance even in demanding situations. The engine's high torque allows operators to execute deep cuts with ease, making it suitable for heavy-duty sawing tasks.

The design of the SP1CE13H18 emphasizes user convenience and safety. Its ergonomic handle is adjustable, allowing for comfortable operation over extended periods. The saw's vibration-reducing technology minimizes hand fatigue, enabling users to maintain precision without sacrificing comfort. Additionally, the unit comes equipped with an integrated water delivery system, which not only helps in cooling the blade but also reduces dust during operation, enhancing job site safety and compliance with regulations.

Another noteworthy feature is the saw’s blade guard. Designed for easy adjustment, it accommodates various blade sizes, offering versatility for different cutting depths. With a maximum cutting depth of 6 inches, the SP1CE13H18 is capable of handling a wide range of projects, from small repair jobs to large construction sites.

The portability of the Multiquip SP1CE13H18 is another key aspect. The saw features a lightweight frame enhanced by durable materials, allowing for easy transport between job sites. Its compact size also means it can be stored conveniently when not in use.

In terms of maintenance, the SP1CE13H18 is designed for efficiency. Easy access to its components ensures that users can perform routine checks and replacements without hassle. This low-maintenance requirement keeps downtime to a minimum, ensuring that projects stay on schedule.

In summary, the Multiquip SP1CE13H18 concrete saw stands out with its powerful Honda engine, ergonomic design, user-friendly features, and impressive cutting capabilities. Its blend of performance, safety, and ease of maintenance makes it an excellent choice for contractors looking for reliability and efficiency in their concrete cutting tools. Whether for professional construction jobs or demanding industrial applications, the SP1CE13H18 meets and exceeds user expectations, making cutting tasks easier and more efficient.