MQ STREET PRO 1 CE SAW — MAINTENANCE

Engine oil change:

Change engine oil the first month or 20 hours of operation.Then every 3 months/or 50 HOURS of operation.See Engine Owner’s Manual for detailed information.

Drain the used oil while the engine is warm by the following method:

Refer to Figure 24.

1.Placeanoilpanorsuitablecontainerbelowtheenginedrain plug to catch the used oil.

2.Remove the filler cap/dipstick and the drain plug.

3.Drain the oil completely and reinstall the drain plug. Ensure the drain plug is tightened securely.

4.Make sure the engine is in a level position and fill to the outer edge of the oil filler hole with the recommended oil. (See Table 3.) Engine oil capacity is 1.16 US quart (1.1 liter).

5.Screw in the filler cap/dipstick securely.

CAUTION

Running the engine with a low oil level can cause engine damage.

Disposeofusedoilproperly. DONOT

pour used oil on the ground, down a

NOTE drain, or throw in the trash. Used oil can generally be taken to your local recycling center or service station for reclamation. Follow all required

environmental rules and regulations required in your area concerning the disposal of hazardous waste such as used oil and oil filters.

Engine tank & strainer:

Clean every year/or 300 hours.

Fuel line:

Replace every two years/or as necessary.

Spark plug:

Clean/adjust every 6 months/or 100 hours. Replace every year/ or 300 hours.

Front Pointer Adjustment

The front pointer wheel has been set at the factory. Use these procedures only if the pointer is suspect of being out of alignment.

1.Chalk out a straight line on the prepared slab or cutting surface.

2.Useastraight-edgeorlevelbyplacingitflatagainsttheblade.

3.Adjustthefrontpointerwheelsoitjusttouchesthesideofthe straight-edge or level.

4.Remove the straight-edge or level.

5.Position the front pointer and blade directly over the chalk line.

6.Start the saw and lower the blade onto the chalk line.

7.Begin cutting and make sure the blade follows the chalk line as closely as possible.

8.The pointer should follow the chalk line as well. If it does not, adjust the pointer by loosening then tightening the jam nuts on the pointer until the pointer follows the same path as the blade.

Figure 24. Engine Oil Change

PAGE 28 — SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08)

Page 27 Page 29
Page 28
Image 28
Multiquip SP1CE13H18 manual Engine oil change, Engine tank & strainer, Fuel line, Spark plug, Front Pointer Adjustment
Page 27 Page 29

SP1CE13H18 specifications

The Multiquip SP1CE13H18 is a robust and highly efficient concrete saw designed for both professional and industrial applications. Its state-of-the-art features make it a preferred choice among contractors for cutting through tough materials like asphalt, concrete, and stone.

One of the standout characteristics of the SP1CE13H18 is its powerful engine. Equipped with a reliable Honda GX390 gasoline engine, this concrete saw delivers an impressive output, ensuring optimal performance even in demanding situations. The engine's high torque allows operators to execute deep cuts with ease, making it suitable for heavy-duty sawing tasks.

The design of the SP1CE13H18 emphasizes user convenience and safety. Its ergonomic handle is adjustable, allowing for comfortable operation over extended periods. The saw's vibration-reducing technology minimizes hand fatigue, enabling users to maintain precision without sacrificing comfort. Additionally, the unit comes equipped with an integrated water delivery system, which not only helps in cooling the blade but also reduces dust during operation, enhancing job site safety and compliance with regulations.

Another noteworthy feature is the saw’s blade guard. Designed for easy adjustment, it accommodates various blade sizes, offering versatility for different cutting depths. With a maximum cutting depth of 6 inches, the SP1CE13H18 is capable of handling a wide range of projects, from small repair jobs to large construction sites.

The portability of the Multiquip SP1CE13H18 is another key aspect. The saw features a lightweight frame enhanced by durable materials, allowing for easy transport between job sites. Its compact size also means it can be stored conveniently when not in use.

In terms of maintenance, the SP1CE13H18 is designed for efficiency. Easy access to its components ensures that users can perform routine checks and replacements without hassle. This low-maintenance requirement keeps downtime to a minimum, ensuring that projects stay on schedule.

In summary, the Multiquip SP1CE13H18 concrete saw stands out with its powerful Honda engine, ergonomic design, user-friendly features, and impressive cutting capabilities. Its blend of performance, safety, and ease of maintenance makes it an excellent choice for contractors looking for reliability and efficiency in their concrete cutting tools. Whether for professional construction jobs or demanding industrial applications, the SP1CE13H18 meets and exceeds user expectations, making cutting tasks easier and more efficient.
Top Page Image Contents