1)Hydraulic tank breather

Slacken the breather to release the tank pressure, otherwise it is impossible to top up oil.

2)Oil drain plug

Unscrew the oil drain plug (1) and drain the oil into a pan. Then screw the oil drain plug back in again.

Filling capacity of hydraulic system: 48L

3)Oil filter

MAINTENANCE & REPAIR

Remove hydraulic oil filter with the special wrench (wrench

(1) with the ref.390159 is supplied with the machine) in pocket behind seat.

4)Hydraulic oil

Fit a new hydraulic oil filter onto the filter cap. Refill fresh hydraulic oil through the filter housing and re-install filter. Retighten tank breather.

Attention:

Never remove the filter cap before any dirt around the neck has been cleaned off! Always change filter and oil at the same time. First oil change after 500h, then every 2000h, but at least once a year.

Main components

PAGE 30 — TANDEM ROLLER:T23,T26,T33 — PARTS & OPERATION MANUAL — REV. #4 (03/12/01)

Page 30
Image 30
Multiquip T23 operation manual Hydraulic tank breather, Oil drain plug, Oil filter, Hydraulic oil, Main components