INITIAL SERVICING
The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing.
Honda GX Series Engine Shown

WC-42S CONCRETE MIXER — BASIC ENGINE COMPONENTS

Figure 3. Engine Controls and Components

5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel.

6. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture.

1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

WARNING

Adding fuel to the tank should be accomplished only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill,

DO NOT attempt to start the engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry.

2. Throttle Lever – Used to adjust engine RPM speed (lever advanced forward SLOW, lever back toward operator FAST).

3.

Engine ON/OFF Switch – ON position permits engine

 

starting, OFF position stops engine operations.

4.

Recoil Starter (pull rope) – Manual-starting method. Pull

 

the starter grip until resistance is felt, then pull briskly and

 

smoothly.

7. Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

NOTE

Operating the engine without an air filter, with a damaged air filter, or a filter in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

8. Spark Plug – Provides spark to the ignition system. Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch). Clean spark plug once a week.

9. Muffler – Used to reduce noise and emissions.

WARNING

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER

operate the engine with the muffler removed.

10. Fuel Tank – Holds unleaded gasoline. For additional information refer to engine owner's manual.

PAGE 14 — WC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #8 (12/16/05)

Page 13 Page 15
Page 14
Image 14
Multiquip manual WC-42S Concrete Mixer Basic Engine Components, Starting, OFF position stops engine operations
Page 13 Page 15

WC-42S specifications

The Multiquip WC-42S is a versatile and robust walk-behind concrete saw, specifically designed for precision cutting and user efficiency. This machine is particularly beneficial to contractors involved in the construction and maintenance of roads, pavements, and other concrete structures. Its durability and high-performance specifications make it a popular choice for both commercial and residential projects.

One of the standout features of the WC-42S is its powerful engine. Powered by a reliable Honda GX390 engine, the saw offers impressive performance, delivering ample power for both wet and dry cutting applications. The engine's fuel efficiency ensures longer operational periods, minimizing downtime for refueling, and its ease of use is a significant advantage for operators of all skill levels.

The WC-42S is equipped with a robust cutting assembly that accommodates a variety of blade sizes, with a maximum cutting depth of up to 4 inches. This adaptability allows users to customize their operations according to specific project requirements. The machine can support blades up to 14 inches in diameter, offering added versatility for various cutting tasks across different materials, including asphalt and reinforced concrete.

A notable technological feature of the WC-42S is its inflexible frame design, which enhances stability and support, ensuring straight cuts even under demanding conditions. The saw also features a user-friendly depth adjustment system that allows for quick changes between cutting depths, providing operators with unparalleled control.

Safety and comfort have also been prioritized in the design of the WC-42S. It is fitted with ergonomic handles that reduce operator fatigue during prolonged use. The saw’s low-profile design allows for better visibility and control, particularly when cutting in tight spaces or intricate patterns.

Moreover, the WC-42S includes an integrated water system for cooling the blade and minimizing dust, contributing to cleaner worksite conditions. This feature not only enhances performance but also improves operator safety by reducing silica dust exposure.

In summary, the Multiquip WC-42S walk-behind concrete saw stands out with its powerful engine, versatile cutting capabilities, user-friendly design, and integrated safety features. Its blend of technology and robust engineering makes it a favorite among professionals looking for reliability and high performance in concrete cutting solutions. With the WC-42S, contractors can achieve precise cuts efficiently and effectively, making it a worthy investment for any concrete project.
Top Page Image Contents