WC-42S CONCRETE MIXER — MAINTENANCE (MIXER)

Ball Socket and Clamp Face Maintenance

1.If the towing vechicle is equipped with a ball socket, smear socket periodically with multi-purpose grease. This will keep the ball socket well lubricated.

2.Periodically oil pivot points and clamp face surfaces of coupler with SAE 30 WT. motor oil.

2.Use Poleyrex EM (Exxon Mobil) or equalivant lubricant. Clean grease fitting, apply grease gun to fitting (1/2 shot). Remember too much grease or injecting grease too quickly can cause premature bearing failure. Slowly apply the recommended amount of grease, taking a miniute or so to apply.

3.When parking or storing your mixer. Keep the coupler off the ground so dirt will not build up in the ball socket.

Grease Fittings (Zerk) Maintenance (Mixer)

There are 3 grease (Figure 26) fittings that will require lubrication. Lubricate these fittings once a week. Use lithium base grease, grade N0.1.

Figure 26. Grease Fittings Mixer

Grease Fittings (Zerk) Maintenance (Electric Motor)

1.There are two grease (Figure 27) fittings at each end of the electric motor that will require lubrication. Lubricate these fittings about every 16 months.

Wheel Bearings

1.After every 3 months of operation, remove the hub dust cap and inspect the wheel bearings (Figure 28). Once a year, or when required, disassemble the wheel hubs remove the old grease and repack the bearings forcing grease between rollers, cone and cage with a good grade of high speed wheel bearing grease (never use grease heavier than 265 A.S.T.M. penetration (“No. 2.”)

Figure 28. Wheel Hub and Bearings

2.Fill the wheel hub (Figure 28) with grease to the inside diameter of the outer races and also fill the hub grease cap. Reassemble the hub and mount the wheel. Then tighten the adjusting nut, at the same time turn the wheel in both directions, until there is a slight bind to be sure all the bearing surfaces are in contact.

Then back-off the adjusting nut 1/6 to 1/4 turn or to the nearest locking hole or sufficiently to allow the wheel to rotate freely within limits of .001" to .010" end play.Lock the nut at this position. Install the cotter pin and dust cap, and tighten all hardware.

Mixer Cleaning

 

1.

For thorough mix and longer drum life, always wash drum

 

 

out after each use.

Figure 27. Grease Fittings Electric Motor

2.

NEVER! pour or spray water over the engine or electric

 

motor.

 

 

PAGE 26 — WC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #8 (12/16/05)

Page 25 Page 27
Page 26
Image 26
Multiquip manual WC-42S Concrete Mixer Maintenance Mixer
Page 25 Page 27

WC-42S specifications

The Multiquip WC-42S is a versatile and robust walk-behind concrete saw, specifically designed for precision cutting and user efficiency. This machine is particularly beneficial to contractors involved in the construction and maintenance of roads, pavements, and other concrete structures. Its durability and high-performance specifications make it a popular choice for both commercial and residential projects.

One of the standout features of the WC-42S is its powerful engine. Powered by a reliable Honda GX390 engine, the saw offers impressive performance, delivering ample power for both wet and dry cutting applications. The engine's fuel efficiency ensures longer operational periods, minimizing downtime for refueling, and its ease of use is a significant advantage for operators of all skill levels.

The WC-42S is equipped with a robust cutting assembly that accommodates a variety of blade sizes, with a maximum cutting depth of up to 4 inches. This adaptability allows users to customize their operations according to specific project requirements. The machine can support blades up to 14 inches in diameter, offering added versatility for various cutting tasks across different materials, including asphalt and reinforced concrete.

A notable technological feature of the WC-42S is its inflexible frame design, which enhances stability and support, ensuring straight cuts even under demanding conditions. The saw also features a user-friendly depth adjustment system that allows for quick changes between cutting depths, providing operators with unparalleled control.

Safety and comfort have also been prioritized in the design of the WC-42S. It is fitted with ergonomic handles that reduce operator fatigue during prolonged use. The saw’s low-profile design allows for better visibility and control, particularly when cutting in tight spaces or intricate patterns.

Moreover, the WC-42S includes an integrated water system for cooling the blade and minimizing dust, contributing to cleaner worksite conditions. This feature not only enhances performance but also improves operator safety by reducing silica dust exposure.

In summary, the Multiquip WC-42S walk-behind concrete saw stands out with its powerful engine, versatile cutting capabilities, user-friendly design, and integrated safety features. Its blend of technology and robust engineering makes it a favorite among professionals looking for reliability and high performance in concrete cutting solutions. With the WC-42S, contractors can achieve precise cuts efficiently and effectively, making it a worthy investment for any concrete project.
Top Page Image Contents