4-9sendInG faxes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
sendInG faxes
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1 Press <Job Confirm./Fax Cancel>, then <Enter>.
2 Press <q> or <p> to scroll through currently stored broadcast commands.
C01:Broadcast
/
/
/Cancel
3 When the command you want to cancel is shown, skip to step 6.
If you want to review individual numbers within this broadcast, go on to step 4 with-
out pressing <Cancel>.
4 To review individual numbers within this broadcast, press <u> to see the first num-
ber. The machine shows:
9-5550388
/
/
/Cancel
5 Press <q> or <p> until you find the number you want to cancel.
6 Press <Cancel>, <Cancel>.
The next number will appear and if you want to cancel this number, press <Cancel>
twice.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling another command, press <t>.
To stop reviewing or canceling commands, press <Reset>.
Printing a delayed command list
Your machine can print a command list which tells you:
• The command’s identification number
• The phone number, or “Remote location”
• The start time (this appears in a DD,HH:MM format)
• A “note” telling you if the command is a polling or F-Code operation.
To print a delayed command list, press <Menu>, <5>, <1>, <0>, <6>, then <Enter>.
Printing a stored document
Your machine can print out each document stored for delayed transmission.
To print a stored document, you will need to know the document’s command number,
which you can obtain by either reviewing the commands or printing a delayed command
list (see above).
1 Press <Menu>, <4>, <3>, <5>, then <Enter>.
Select Comm. No.
C01:123-4567
2 Press <q> or <p> to select the command number.
3 Press <Enter>.