Murphy AT03069 specifications Description, Applications, Specifications, Features, Warranty

MURPHYMATIC® Engine Throttle Controller

AT-04052B

Revised 04-04

Replaces AT-98113B

Catalog Section 40

(00-02-0567)

Model AT03069

■Automatically adjusts engine speed to meet demands of pressure, level, load and temperature.

■Speed changes made slowly and smoothly.

■Saves fuel, engine wear, horsepower and labor.

■Perfect for warm-up and cool-down on auto- mated systems.

■One model for both 12 and 24 VDC systems.

Description

The AT03069 is a completely reliable heavy duty device developed specifically to auto- matically control engine speed to meet sys- tem demand. Low current, high torque, solid state switching and electronic clutch make it ideal for all automatic and semiautomatic engine systems. Used with the appropriate Murphy SWICHGAGE®, near constant pressure, level and load can be maintained. Check with our engineers for help with other applications where speed control can improve your system.

Applications

Pressure

•City Water Systems.

•Water Flood Injection.

•Sprinkler Lateral Changes.

•Make-up if a “Gang Pump” stops.

•Multiple Hose-reel Irrigation Systems.

Level

•Water or oil storage tanks.

•Waterflood tanks.

•Sewer disposal systems.

•Flood control catch basins.

Temperature

•Multi-engine cooling systems.

•Air conditioned chilled water systems.

Engine load

Empty or fill reservoirs with a lower horsepower engine—fast when head is high—slow when head is low.

Specifications

Voltage: 11-28 VDC negative ground.

Maximum Current: 500 mA (1/2 amp).

Standby Current: Approx. 7 mA.

Increase and Decrease: Inputs float at approx. 8.4 VDC. Grounding inputs causes 8-18 mA of current to flow from either.

Torque: 25 inch pounds.

Sealed limit switches: Factory adjusted, controls maximum travel.

Linkage adjustment on lever arm—5 holes: Adjusts travel: 1-3/16 in. (30 mm); 1-11/16 in. (43 mm); 2 in. (51 mm); 2-1/4 in. (57 mm) approximately.

Travel Time: 11 to 20 seconds depending on the voltage and force applied.

Dimensions: See reverse side.

Net Weight: 5 lb. (2.27 kg)

Features

The AT03069 can enhance features of our SELECTRONIC® Micro-Controller units by allowing features such as:

•Warm-up RPM Set point.

•Minimum RPM Set point.

•Maximum RPM Set point.

•Preset Operating RPM Set point.

•Auto Throttling To Match Flows

(as needed in flood control applications).

•Maintaining System Pressure (as needed in booster station application).

•Adjustable Rate Of Change In RPM (allowing fine tuning of overall system).

For more information, recommendations and quotations contact our engineering dept.

Warranty

A limited warranty on materials and workmanship is given with this FW Murphy product. A copy of the warranty may be viewed or printed by going to www.fwmurphy.com/support/warranty.htm

AT-04052B page 1 of 2