Canopy T1/E1 Multiplexer

September 2004

 

 

 

T1/E1 Multiplexer FPGA Version 3.4

 

 

 

 

 

LED

 

LED indicator descriptions

 

 

 

 

LAN ACT

OFF when no activity; BLINKING when frames are being transmitted or

 

 

received on the line

 

 

 

 

 

T1/E1 Sync

ON when the port is synchronized (no alarm); OFF when Loss of signal

 

 

(LOS); one LED for each T1/E1

1.2.6Features

The Canopy T1/E1 Multiplexer

installs easily.

multiplexes up to 4 T1 or 3 E1 circuits onto a Canopy Backhaul point-to-point link.

enables T1/E1 extension over Ethernet networks.

supports

synchronous TDM-based services over wireless Ethernet networks.

CAS signaling transparent to all other signaling protocols on T1/E1.

10Base-T/100Base-TX uplink to the network.

management interfaces.

simplified troubleshooting through T1/E1 line loopback test.

1.2.7Specifications

Physical Specifications

Table 4 lists the physical specifications for the Canopy T1/E1 Multiplexer.

Table 4: Canopy T1/E1 Multiplexer physical specifications

Specification

Description

 

 

DC Power

Option 1: 100/240 v, 47−63 Hz, 0.4 A (+3.3 v DC)

 

 

 

Option 2: −48 v DC

 

 

LAN Connection

2-100Base-TX, RJ-45 cable provided

 

 

T1/E1 Connections

4

 

 

Control Port

RS-232, DB9 (female)

 

 

Indicators

power, ready, Canopy BH Ethernet link; Canopy BH Ethernet

 

activity; LAN Ethernet link; LAN Ethernet activity; T1/E1

 

synchronization (one per port)

Temperature

0° C to 40° C

 

 

Humidity

95% non-condensing

 

 

Dimensions

1.52” (3.86 cm) high x 5.57" (14.15 cm) wide and 7.50" (19.05 cm)

 

deep

 

 

Weight

1.5 pounds (680 grams)

 

 

Issue 3

Page 15 of 73

Page 15
Image 15
Motorola manual Features, Physical Specifications, Canopy T1/E1 Multiplexer physical specifications