Canopy T1/E1 Multiplexer | September 2004 |
| T1/E1 Multiplexer FPGA Version 3.4 |
3.Click Browse to find the new FPGA firmware that your authorized Canopy distributor or reseller provided.
4.Select the file to download.
NOTE: Typically the filename has the format Vx_y.bin (for example,
V3_4.bin).
5.Click Download.
RESULT: The status bar indicates the progress of the download process.
IMPORTANT!
During the download process, do not interrupt the download process.
6.Wait until the download is complete.
7.Reset the T1/E1 Multiplexer according to Procedure 26 on 56. RESULT: The upgrade process is complete.
8.From the main menu of the EMS, select Help→About Canopy T1/E1 Mux.
9.Verify that the intended firmware version is indicated on the screen that results, as shown in Figure 25.
Figure 25: FPGA revision details screen
end of procedure 
Issue 3 | Page 60 of 73 |
