Canopy T1/E1 Multiplexer

September 2004

 

T1/E1 Multiplexer FPGA Version 3.4

1.3.2License Keys

Each Canopy T1/E1 Multiplexer is purchased and shipped as 1-port enabled or 4-port enabled. You can upgrade any pair of 1-port enabled Canopy T1/E1 Multiplexers through the purchase and installation of

two keys, one per unit, to transform both to 2-port enabled.

four keys, two per unit, to transform both to 3-port enabled.

six keys, three per unit, to transform both to 4-port enabled.

1.3.3Power Adapters

For connection to power sources, the 110-volt power supply pictured in Figure 3 on Page 12 and the global adapter set pictured in Figure 4 on Page 12 are included with the purchase of each Canopy T1/E1 Multiplexer.

WARNING!

An external AC surge suppression device must be used with the Canopy T1/E1 Multiplexer. For infrastructure installations, Canopy Engineering recommends an AC line surge suppression unit that meets the standard IEC 801-5 (EN61000-4-5) Maximum Surge Voltage (1.2x50µsec) 6 KV.

The −48 v screw-down adapter for battery backup pictured in Figure 5 on Page 13 is an option.

1.4PRODUCT LABELS

Labels on the Canopy T1/E1 Multiplexer include

ESN — Electronic Serial Number, the Media Access Control (MAC) address

MSN — Model Serial Number, which allows tracking of the product

Factory Configuration, which identifies the product as

Master Unit or Slave Unit

1-Port Unit or 4-Port Unit

1.5FUNCTIONAL DESCRIPTION OF THE CANOPY T1/E1 MULTIPLEXER

The Canopy T1/E1 Multiplexer has a LAN Ethernet port, a Canopy Backhaul Module Ethernet port, and four ports as follows:

up to four available when the unit is configured for the T1 transmission scheme.

up to three available when the unit is configured for the E1 transmission scheme (to support Canopy BH20 Backhaul link traffic).

Configuration and management are provided using the command line interface (CLI) or

EMS GUI.

Issue 3

Page 18 of 73

Page 18
Image 18
Motorola manual Product Labels, Functional Description of the Canopy T1/E1 Multiplexer, License Keys, Power Adapters