Pulsation Dampener

PD-95145B

Revised 11-03

Catalog Section 55

(00-02-0125)

PD8100 Series

Used On Controllers, Instruments and Recorders to Dampen Pressure Pulsation

Eliminate Gage Pointer Flutter

Aids In Providing More Accurate Pressure Indication

Decreases Wear On Gage’s Geared Movement

NOT INTENDED FOR USE AS A SHUTOFF VALVE

Description

The PD8100 Series eliminates pointer flutter on pressure indicating SWICHGAGE® devices which are subject to pulsating pressure from reciprocating pumps or compressors. It also allows a close setting of high and low contact points providing for more accurate pressure indication and control of equipment.

The PD8100 Series decreases wear on geared movements and increases the life of pressure indicating instruments by eliminating exces- sive gage strain and unnecessary movement.

A necessity which quickly pays for itself by protecting any pressure indicating and control instrument which is subject to pulsation.

PD8100 SERIES NOT FOR USE ON OXYGEN OR LIQUID OXYGEN APPLICATIONS.

Quality built with a large diameter valve stem wheel for ease of adjustment with clearly printed operating instructions. Machined from 1-3/8 in. (35 mm) hex bar stock. A two degree taper on valve and stem assure positive dampening.

Available in brass, carbon steel, 303 stainless steel or 316 stainless steel to meet pressure and environmental requirements with either 1/2 NPT or 1/4 NPT inlet connections.

Specifications

See “How to Order” section for available inlet and outlet connections.

PD8183: All wetted parts are Brass. Rated to 3,000 psi (20.68 MPa) [206.80 bar].

PD8184: All wetted parts are Carbon steel. Rated to 5,000 psi (34.47 MPa) [344.70 bar].

PD8185: All wetted parts are 303 stainless steel. Rated to 10,000 psi (68.95 MPa) [689.50 bar].

PD8190: All wetted parts are 316 stainless steel. Rated to 10,000 psi (68.95 MPa) [689.50 bar]. Meets NACE standard MR- 01-75 for direct exposure to H2S.

Operating Temperature:

-15 to 400°F (-26 to 204°C)

Shipping Weight (all models): 2 lbs.(0.9 kgs.)

Shipping Dimensions (all models):

4-3/4 x 4-3/4 x 3-1/4 in. (121 x 121 x 83 mm)

Warranty

A limited warranty on materials and workmanship is given with this FW Murphy product. A copy of the warranty may be viewed or printed by going to www.fwmurphy.com/support/warranty.htm

Eliminate pointer flutter

like this.

MURPHY SWICHGAGE

RUN

START

Make SWICHGAGE® instruments and recorders operate like this.

MURPHY SWICHGAGE

RUN

START

Page 1
Image 1
Murphy PD8100 Series specifications Description, Specifications