Murphy PVS-5 specifications Product Dimensions Specifications, Input Voltage

00-02-0645

01-21-09 Section 78

PVS-5 Power Supply – Installation Instructions

•Provides 5 Volt power supply to PVM gages

•Capable of supplying power to a maximum of 6 PVM gages

•Enables PVM gage compatibility with existing MurphyLink products

•Easy mounting and installation

External power is required to make the PVM gage line compatible with existing MurphyLink products, i.e. PV1000, Cascade, iGUARD and eGUARD. The PVS-5 power supply device supplies 5 Volts of external power and load dump protection for up to 6 PVM gages. The maximum length of the power and data connection between gages is 0.5meters (8.5 meters total).

The unit may be installed inside a panel or behind a dash.

Product Dimensions

Specifications

Input Voltage:

•6 VDC minimum to 32 VDC maximum

•12/24 VDC Nominal

Output Voltage: 5 VDC @ 450mA maximum

Reverse Polarity Protection: -36VDC

Overvoltage Protection: +36VDC and above

Overcurrent Protection: 600mA @ 36VDA

maximum

Connector: AMP 1-770968-1

Operating Temperature: -40°F to 185°F (-40°C to +85°C)

Storage Temperature: -40°F to 221°F (40°C to +105°C)

Random Vibration: 5-2,000 Hz

Operating Shock: 50G

Certification: CE

Case Material: Polyamide

Dimensions: 2”x2”x.75”

Mounting Hole Dimensions: Two #8 screws, 1.625" offset

In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time. MURPHY, the Murphy logo, MurphyLink™ and PowerView™ are registered and/or common law trademarks of Murphy Industries, Inc. This document, including textual matter and illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2008 Murphy Industries, Inc.