Murphy specifications WD185 Engine Kit, Description, Specifications, WD100 Series Kits

Swichgage® Kits for Engines

WD-8198B

Revised 03-06

Catalog Section 30

(00-02-0088)

WD100 Series

WD185

Engine Kit

•Universal Mounting Panel

•Guard against low oil pressure or high running temperature

•For farm or construction equipment

Description

The WD100 Series Swichgage kits provide engine monitoring that shuts down farm, construction, or other engine powered equipment, when dangerous pressures or temperatures occur. The control center for each of these kits is the compact and adjustable, Universal Mounting Panel. This panel holds two Swichgage(s) and a Tattletale® magnetic switch, and shut down device where appropriate.

Specifications

•Murphy Swichgage products are two-instruments-in-one: (1) an accurate indicating gauge with (2) a built-in, adjustable, limit switch.

•518PH Tattletale magnetic switch is designed to shut down engines; operates as a circuit breaker to interupt the ignition circuit to a distibutor or to close a solenoid fuel valve on diesels.

•Temperature capillary tubes are 6 ft. (1.8 m) standard, but can be ordered in any length.

•Standard Swichgage ranges*:

Pressure: 0-100 psi (0-689 kPa) [0-6.89 bar]

Temperature: 100-250°F (37-121°C)

*Other ranges are available on request.

WD100 Series Kits

Depending upon the kit selected, the following components are supplied:

A Universal Mounting Panel which consists of:

•20P, oil pressure Swichgage instrument

•20T, temperature Swichgage instrument with 6 ft. (1.8 m) capillary, or 20TH, temperature Swichgage instrument for WD175 kit.

•518PH Tattletale magnetic switch

Kit Combinations

These kits are available for virtually any engine application, any engine type, or can be custom ordered to meet a specific use.

Kit WD100 includes: A, and B

Suitable for use on distributor ignition engines or on diesels having a shutdown solenoid in the fuel pump.

Shipping Weight: 4.75 lbs (2.2 kg)

Shipping Dimensions: 9-3/4in. x 9-1/4in. x 5-3/4in. (248 mm x 235 mm x 146 mm)

Kit WD150 includes: A, B, C, and E

Suitable for most liquid cooled diesel engines.

Shipping Weight: 6.15 lbs (2.8 kgs.)

Shipping Dimensions: 9-3/4in. x 9-1/4in. x 5-3/4in. (248 mm x 235 mm x 146 mm)

Kit WD175 includes: A, B, C, and E

Suitable for air cooled diesel engines; 10 mm 1.5 adaptor and special head temperature bulb. Includes SV-Series fuel valve.

Shipping Weight: 6.15 lbs (2.8 kgs.)

Shipping Dimensions: 9-3/4in. x 9-1/4in. x 5-3/4in. (248 mm x 235 mm x 146 mm)

Kit WD185 includes: A, B, C, D, and E

Suitable for engines with gear driven transfer pump. (SV-Series is not required on engines with built-in shutdown in the injector pump.)

Shipping Weight: 6.20 lbs (2.8 kgs.)

Shipping Dimensions: 9-3/4in. x 9-1/4in. x 5-3/4in. (248 mm x 235 mm x 146 mm)

A E

B Bracket mounting bolts, washers and nuts.

C CKV2336, fuel reverse flow/check valve.

D PRV50, fuel pressure relief valve

E SV-Series, fuel shut-off solenoid valve (1/4 NPT X 1/4 NPT) Specify 12VDC or 24VDC.

B

D

C

—Especially designed for adaption to a wide variety of engines.

WD-8198B page 1 of 2