0710175
XM500 I/O Module
Features
•Adds I/O to J1939 Network
•Works with Standard J1939 Display Modules
•Wide Operating Temperature Range
•Industry Standard Deutsch Enclosure and Connectors
•Custom Programming Available
The XM500 is a configurable Input / Output (I/O) module designed to bring analog input and digital input and output information onto the SAE J1939 Controller Area Network. Your application may require monitoring additional I/O information which may not be provided by the OEM Engine or Transmission Electronic Control Unit (ECU), such as Fuel Level, Hydraulic Oil Pressure, or a Low Engine Coolant Level switch. The XM500 is ideally suited to bring the additional information you need onto the J1939 CAN bus, and can be configured to broadcast fault codes and activate digital outputs per input conditions such as Fuel Level Low, Hydraulic Oil Temperature High, etc. Because the XM500 broadcasts information using the J1939 standard protocol, the information can be displayed using standard J1939 display modules, such as the PowerView PV101.
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time. MURPHY and the Murphy logo are registered and/or common law trademarks of Murphy Industries, Inc. This document, including textual matter and illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2007 Murphy Industries, Inc.
