PREPARATION
MODELS WITH OPTIONAL GRASS BAG
HOW TO MOUNT THE GRASS BAG
IMPORTANT: Make sure the hooks, on each side of the frame assembly, are mounted on the pivot rod.
1.To mount the grass bag on the mower, raise the rear door. Hold the handle of the grass bag. Put the grass bag in the operating position (Figure 11). Lower the rear door.
WARNING: Do not use the grass bag unless the cover is in the op- erating postion.
Handle |
Rear Door |
Mount Frame |
Hooks To Pivot Rod |
Handle Bracket |
Figure 11 |
HOW TO EMPTY THE GRASS BAG
WARNING: Before you remove the grass bag, stop the engine. Before you remove any grass from the mower housing, disconnect the wire from the spark plug.
1.Hold the rear door. Raise the rear door to a vertical position (Figure 11).
2.Lift the frame assembly over the two handle notches.
3.Open the top cover (Figure 12). Empty the grass from the grass bag.
4.To mount the grass bag on the mower, see “How To Mount The Grass Bag”.
Grass Bag |
Top Cover |
Figure 12 |
14 |
