MAINTENANCE

HOW TO LEVEL THE MOWER HOUSING

If the mower housing is level, the blade will cut easier and the lawn will look better.

WARNING: Before you make an inspection, adjust- ment, or repair to the unit, disconnect the wire to the spark plug. Remove the spark plug wire to prevent the engine from starting by accident.

1.Make sure the unit is on a hard flat surface.

2.Check the air pressure in the tires. If the air pressure is incor- rect, the mower housing will not cut level. The correct air pres- sure is shown on the side of the tire.

IMPORTANT: On models equipped with gauge wheels, the gauge wheels must be removed to correctly adjust the level of the mower housing.

3.Some models have gauge wheels on the mower housing. If equipped, remove the gauge wheels.

4.Open the cover.

5.Move the lift lever to the LEVEL ADJUSTMENT position (Figure 24).

WARNING: The lift lever is spring loaded. Make sure the lift lever is locked in the LEVEL ADJUSTMENT position.

6.Loosen the left and right adjuster knobs (Figure 25). Push down on each side of the mower housing. Make sure both sides of the mower housing are setting on a flat surface. Also, make sure the lift links are loose and can easily move up or down.

7.Push down on the lift links and tighten the left and right adjust- er knobs (Figure 25). Make sure the adjuster knobs are tight. If necessary, use a wrench to tighten the adjuster knobs. For plastic adjuster knobs, tighten to a torque of 7 foot pounds (9,5 N-m). For metal adjuster knobs, tighten to a torque of 10 foot pounds (13,5 N-m).

8.Raise the lift lever from the LEVEL ADJUSTMENT position to a CUTTING HEIGHT position (Figure 26).

9.Close the cover.

10.If equipped, install the gauge wheels.

11.Mow for a short distance. If the height of cut is not level, repeat the above steps.

CAUTION: Do not operate with the mower housing in the LEVEL ADJUSTMENT position. If you operate in the LEVEL ADJUSTMENT position, the mower housing and blades can be damaged.

Lift Lever

 

Cover

Cutting Height Positions

 

Level Adjustment Position

 

Figure 24

Lift Link

 

Adjuster Knobs

Figure 25

Lift Lever

Cover

Cutting Height Positions

Figure 26

F-050700L

28

Page 27 Page 29
Page 28
Image 28
Murray 405000x8E manual HOW to Level the Mower Housing
Page 27 Page 29

405000x8E specifications

The Murray 405000x8E is an innovative product that has garnered significant attention in various industries due to its advanced features, technologies, and user-friendly characteristics. Designed for efficiency and performance, the 405000x8E combines cutting-edge engineering with practical applications, making it a valuable asset for professionals seeking reliable solutions.

One of the main features of the Murray 405000x8E is its robust construction, which ensures durability and longevity even in demanding environments. This product is built with high-quality materials that can withstand harsh conditions, making it suitable for a range of applications from industrial to commercial use. Users appreciate the reliable performance that the 405000x8E consistently delivers over time.

In terms of technology, the Murray 405000x8E incorporates state-of-the-art components that enhance its functionality. It features a powerful processing unit that allows for quick data handling and processing, contributing to increased productivity. The integration of smart technology enables real-time monitoring and adjustments, providing users with greater control and flexibility. This smart technology aspect is particularly advantageous for industries that require precise data analysis and quick decision-making.

Another notable characteristic of the Murray 405000x8E is its energy efficiency. Designed with sustainability in mind, this product minimizes energy consumption without compromising on performance. The incorporation of energy-efficient technologies not only reduces operating costs but also supports eco-friendly practices, making it an attractive choice for environmentally conscious users.

User-friendliness is a core element of the Murray 405000x8E. The intuitive interface ensures that operators can quickly familiarize themselves with the system, reducing the learning curve and minimizing the potential for operational errors. Additionally, the product is designed for easy maintenance, with accessible components that simplify troubleshooting and repairs, ultimately leading to reduced downtime.

Overall, the Murray 405000x8E stands out in the market for its combination of durability, advanced technology, energy efficiency, and user-centric design. Whether for industrial applications, commercial ventures, or any other demanding fields, the 405000x8E is a reliable solution that meets the diverse needs of its users. As industries continue to evolve, products like the Murray 405000x8E will play a pivotal role in shaping efficient and sustainable operations.
Top Page Image Contents