Tools Required for Assembly, Unpack Carton

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1) 1/2" wrench Utility knife

(1)3/4" wrench Tire pressure gauge Pliers

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dashed lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

•Slide extension shaft onto lower steering shaft.

•Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

•Position front wheels of the tractor so they are pointing straight forward.

•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

•Assemble large flat washer, 5/16 lock washer, 5/16 hex bolt and tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

INSERT

5/16 HEX BOLT

5/16 LOCK

WASHER

LARGE FLAT WASHER

STEERING

WHEELSTEERING BOOT

TABS

ADAPTER

EXTENSION

SHAFT

LOWER

STEERING

SHAFT

			19	TAB
0	2	8	19	SLOTS

FIG. 1

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

96017000700 specifications

Murray 96017000700 is a versatile outdoor power equipment known for its robust design and efficient performance. This model is primarily a push mower, making it an ideal choice for homeowners seeking reliable and powerful lawn maintenance tools. Its features and technologies are tailored to provide an effective mowing experience, making it a popular choice among gardening enthusiasts.

One of the standout features of the Murray 96017000700 is its powerful engine. It is equipped with a reliable gas-powered engine that ensures strong performance across various mowing conditions. This engine provides the necessary torque to tackle thick grass and uneven terrains, allowing users to achieve a clean and manicured lawn effortlessly.

The mower boasts a cutting deck that is designed for durability and efficiency. Constructed from high-quality materials, the deck is both lightweight and strong, which helps in providing longevity to the product. Its cutting width allows for efficient mowing of large areas in less time, reducing the effort needed for lawn maintenance.

Another significant characteristic of the Murray 96017000700 is its adjustable cutting height feature. Users can easily adjust the height of the mower's blades to suit different grass types and lengths, ensuring a consistent cut tailored to personal preferences. This flexibility is particularly advantageous during the growing season when grass may vary significantly in height.

The ergonomic design of the mower enhances user comfort and control. Its handle is designed for ease of use, making it simple to maneuver around garden beds, trees, and other obstacles. Additionally, the mower includes a reliable starting system that minimizes the effort required to get the engine running, allowing for a hassle-free mowing experience.

In terms of maintenance, the Murray 96017000700 is specifically designed for easy servicing. Routine checks can be conducted with minimum hassle, and the mower's components are accessible for any necessary repairs or replacements. This ease of maintenance ensures that the mower remains in top working condition for years.

Overall, the Murray 96017000700 stands out in the market for its combination of power, durability, and efficiency. With its user-friendly features and solid construction, it is a valuable addition to any homeowner’s gardening toolkit, making lawn care a manageable and straightforward task. Whether tackling small yards or larger lawns, this mower remains a reliable partner for maintaining lush and healthy grass.

Murray 96017000700 Tools Required for Assembly, To Remove Tractor from Carton, Unpack Carton

Models: 96017000700