Musical Fidelity AMS50 manual

AMS50 AMPLIFIER SPECIFICATIONS

Output: Power

Voltage, RMS

Voltage, Peak-to-peak

Current peak-to-peak

Damping factor

Output devices

Thermal cut out (internal temp)

Balanced Line input:

THD + noise, 20Hz to 20 kHz Signal to noise ratio

Input sensitivity for 50 Watts Input impedance Frequency response

Connections:

Line level inputs

Speaker outputs

Trigger input

Trigger level

Power requirement:

Mains voltages:

Consumption:

Weight:	60 kg	132 lbs
	65 kg	143 lbs
Dimensions:	483 mm	19 inches
	325 mm	12¾ inches
	460 mm	18¼ inches

Standard accessories:

50 Watts per channel into 8 Ohms (17dBW),

100 Watts per channel into 4 Ohms

20 Volts 20Hz to 20 kHz

58Volts

100Amps

12per channel 70ºC

<0.006% unwtd.

>110dB ‘A’-weighted 650mV

50k Ohms

10Hz to 40 kHz, +0, -0.4dB

1 pair line level XLR (balanced) connectors

1 pair line level RCA connectors

4 pair 4mm banana plug/binding posts 3.5mm/⅛” mono jack socket

±5V to ±12V

115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative)

600 Watts maximum into 8 Ohms

14 Watts idle (mains LEDs lit)

unit only, unboxed in shipping carton

wide

high including feet

deep (front to back) including terminals

IEC type mains lead (10-Amp type),

Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.

Issue 1 Page 11 of 12