INTRODUCTION
Congratulations on the purchase of your new X-RAY V8 CD player.
The X-RAY V8 has extremely low jitter, vanishingly low distortion, exemplary linearity and ultra low noise. Its case design complements the X-V8series components which include a DAB/FM tuner and integrated amplifier all in the same convenient size.
Great attention has been paid to internal layout, isolating each circuit section to prevent possible interaction.
The CD digital data streams are first up-sampled to 192kHz, which moves noise, jitter and distortion artefacts well above the audio band. They are then passed through a new, low noise, low distortion 24-bit dual-differential digital-to-analogue converter, which allows simpler filtering of the analogue output. This in turn gives an improved audio response without the need for sharp filters that degrade sound quality. The result is a CD player which has a smoother response than previously possible with none of the “hardness” of other units.
The resultant performance achieved by this unit is among the best in the world. It has excellent signal to noise ratio, low distortion, wide bandwidth, huge dynamic range, extraordinary resolution and fine detail.
UPGRADE PATH
Early in 2007 two interesting new X-V8series products are coming.
-The TRIPLE-X170 PSU is an upgrade Power Supply Unit. It increases the power of your X-T100 to 85+85 wpc and improves its peak current. The TRIPLE-X170 PSU will power the X-T100, X-RAYV8and X-PLORAV8simultaneously. Any product connected to it will sound better.
-The X-DACV8is a super-performance Digital to Analogue Converter with a tube output. Its performance is verging on state-of-the-art and sounds extraordinary. The X-DACV8is self-powered and also has power supply outlets for the X-RAYV8and X-PLORAV8. When the X-RAYV8is paired with the X-DACV8, what you have is a mini KW25 system (the KW25 Transport/DAC received incredible reviews which recon it’s probably the best CD player ever).
INSTALLATION
Position the X-RAY V8 on a stable, horizontal surface where there is no risk of it being knocked, or subjected to vibration such as from loudspeakers.
Protect your X-RAY V8 from humidity - if the unit is moved from a cold place to a warm room, or in generally humid conditions, moisture can form on the pickup lens inside the player, preventing the laser beam from reading the disc. If this happens, remove the CD, close the disc drawer, and leave the unit switched on for an hour or so to allow sufficient time for the moisture to evaporate.
AUDIO CONNECTIONS
Outputs: Connect your amplifier inputs to the RCA sockets on the back panel marked as LEFT and RIGHT outputs.
If desired, the unit can also be attached to an external DAC of your choice. The unit outputs COAX and OPTICAL digital signal stream at 44.1kHz.
POWER CONNECTION
The power lead should be connected to a Musical Fidelity power supply unit designed for this product, such as the TRIPLE-X(see your dealer for more information). The connector from this CD player mates with the 5-way socket labelled X-RAYV8on the rear of the power supply unit. The connector should fit comfortably with a small click when properly seated.
Do not force the connector.
NOTES ON USING COMPACT DISCS
Always hold discs by the edges and make sure they remain clean - do not touch the surface. Keep discs away from direct sunlight and heat sources, such as radiators. Clean discs with a cloth before playing them, but do not use solvents such as benzene, thinners, or antistatic spray intended for analogue records.
After playing, always return the disc to its case for storage.
CLEANING
Before cleaning the unit, switch off power at the mains switch and remove the mains plug from the wall socket. Clean the cabinet and remote control unit using a moist cloth. We do not advise using solvents, white spirit or thinners as they could damage the surface finish.
