Musical Fidelity specifications X-150 Integrated Amplifier, Page 8 of, Page 1 of, Issue 4 May

X-150 SPECIFICATIONS

Output : Voltage RMS :	29 Volts 20Hz to 20kHz, one channel loaded
Peak :	82 Volts
Power :	105 Watts one channel into 8 Ohms (20dBW),
	141 Watts one channel into 4 Ohms
Peak-to-peak output current :	50 Amps
Damping factor :	80
Output devices per channel :	4
Pre-output impedance :	50 Ohms
Line inputs :
Total harmonic distortion + noise :	< 0.01% 20Hz to 20kHz
Signal / noise ratio :	> 98dB ‘A’-weighted
Input sensitivity for 105Watts, 8 Ohms : 250mV
Input impedance :	220k Ohms
Overload margin :	26dB
Channel separation :	> 70dB typical
Frequency response :	20Hz to 20kHz, + 0, - 0.2dB

X-150

DUAL MONO INTEGRATED AMPLIFIER

Phono input :

Frequency response reference

IEC RIAA - see graph . . .

Signal / noise ratio :

Input sensitivity :

Input impedance :

Overload margin :

Input facilities :

Output facilities :

Power requirement :

Dimensions :

Weight :

Standard accessories :

25
20
15
10											IEC
5											RIAA
dB												FREQUENCY(Hz)
0
-5	10	16	25	40	63	100	160	250	400	630 1.25K	2K 3.15K	5K	8K	12.5K 20K
-10
-15
-20
-25

> 94dB ‘A’-weighted 2.5mV Moving Magnet 47k Ohms

24dB

3 pairs line level RCA connectors,

1 pair phono RCA connectors

2 amplifier channels via 1 pair per channel binding posts. 1 pair RCA audio outputs controlled by the volume,

1 pair RCA tape record fixed line level output.

100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), 320 Watts maximum into 8 Ohms, 32 Watts idle

218mm, 8.6 inches wide

98mm, 3.8 inches high (including feet) 377mm, 14.9 inches deep

(including knob and rear terminals)

6.5 kg,	14.3 lbs unit only, unboxed
8 kg,	17.7 lbs in shipping carton

IEC type mains lead (10-Amp), remote control,

2 batteries size LR03 or AAA, manganese alkaline type

INSTRUCTIONS FOR USE

Thank you for purchasing the Musical FidelityX-150 Integrated amplifier.Used properly and carefully, it should give you many years ofoutstanding musical reproduction.

Aesthetically, the X-150 Integrated amplifier is a perfect match for the X-RAY Version 3 CD player.

Together, they form one of the finest hi-fi systems available.Dust regularly with a soft cloth or soft brush, but be careful whenusing cleaning or polishing agents - they may harm the surface finish.If you have any questions about your audio system,please consult your dealer who is there to help and advise.

Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.

X-150 Integrated Amplifier Page 8 of 8

Issue 4 May 2004 X-150 Integrated Amplifier Page 1 of 8