SAFETY INFORMATION

IMPORTANT! (U.K. only)

This unit is supplied in the U.K. with a mains lead fitted with a moulded 13 amp plug. If, for any reason, you need to cut off this plug, please remove the fuse holder and dispose of the plug safely, out of reach of children. It must not be plugged into a mains outlet.

The wires in the mains lead supplied with this appliance are coloured in accordance with the following code:

Green and yellow

Earth

Blue

Neutral

Brown

Live

WARNING - This appliance must be earthed

As the colours of the wires of the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or coloured green or green-and-yellow, or by the earth symbol:

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

If connecting to a BS1363 plug, a 13 amp fuse must be used.

WARNING:

Any modifications to this product not expressly approved by Musical Fidelity who is the party responsible for standards compliance could void the user’s authority to operate this equipment.

Your new X-P200 is designed and built to provide trouble-free performance, but as with all electronic devices, it is necessary to observe a few precautions :

„Do not use the X-P200 near water. The unit must not be exposed to dripping or splash ing and no objects filled with liquids, such as vases, must be placed on the unit.

„Keep the X-P200 away from heat such as radiators. No naked flame sources, such as lighted candles, should be placed on the unit.

„Place all connecting cables where they are not likely to be walked on or trapped by items placed on them.

X-P200 SPECIFICATIONS

Output :

 

 

 

Power, stereo mode :

 

125 Watts, one channel loaded into 8 Ohms

 

 

(21dBW)

Power, bridge mode :

 

260 Watts into 8 Ohms (24dBW)

Voltage RMS, stereo mode :

 

31.6 Volts 20Hz to 20kHz, one channel loaded

Voltage peak, stereo mode :

 

44.5 Volts, one channel loaded

Current peak-to-peak (unlimited) :

75 Amps

Damping factor, stereo mode :

 

200

 

Output devices per channel :

 

4 (stereo), 8 (bridge)

Line inputs :

 

 

 

Total harmonic distortion + noise :

< 0.015 20Hz to 20kHz

Signal / noise ratio :

 

> 107dB ‘A’-weighted

Input sensitivity for 125W, 8 Ohms : 1 Volt

Input impedance :

 

27k Ohms in stereo mode, 220k Ohms bridge mode

Channel separation :

 

> 70dB typical

Frequency response :

 

20Hz to 20kHz, + 0, - 0.1dB

Input facilities :

“A”

1 pair RCA connectors, selectable from front panel

 

“B”

1 pair RCA connectors, selectable from front panel

Output facilities :

 

2 amplifier channels or 1 channel in bridge mode

 

 

(switchable from front panel) via 1 pair per channel

 

 

 

binding posts.

 

 

1 pair RCA loop output sockets

Power requirement :

 

100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),

 

 

600 Watts maximum (bridge mode) into 8 Ohms,

 

 

30 Watts idle.

Dimensions :

 

218mm, 8.6 inches wide

 

 

98mm, 3.8 inches high (including feet)

 

 

339mm, 13.4 inches deep (including knob

 

 

 

and rear terminals)

Weight :

 

6.1 kg, 13.4 lbs unit only, unboxed

 

 

7.15 kg, 15.8 lbs in shipping carton

Standard accessories :

 

IEC type mains lead (10-Amp type)

 

 

 

 

 

 

 

 

Musical Fidelity reserves the right to make improvements which may result in specification

or feature changes without notice.

Page 2 of 7

X-P200 Power Amplifier

 

X-P200 Power Amplifier

Page 7 of 7

Page 1 Page 3
Page 2
Image 2
Musical Fidelity X-P200 manual Safety Information, IMPORTANT! U.K. only
Page 1 Page 3

X-P200 specifications

The Musical Fidelity X-P200 integrated amplifier is a prominent audio component that has gained recognition for its high-quality sound reproduction and refined design. Emphasizing a balance of power and precision, it seamlessly integrates into any audiophile's home audio system.

One of the key features of the X-P200 is its high output power, reaching an impressive 100 watts per channel into 8 ohms. This power allows it to drive a wide range of speakers, providing robust performance and dynamic sound across various musical genres. The amplifier’s dual mono architecture ensures that each channel operates independently, allowing for enhanced stereo separation and improved soundstage.

The X-P200 employs sophisticated Class A/B amplification technology, which combines the advantages of both Class A and Class B designs. This results in low harmonic distortion and superior linearity, delivering a warm and detailed musical experience. Additionally, the amp boasts a high damping factor, which facilitates excellent control of the connected speakers, ultimately producing tight and articulate bass response.

In terms of connectivity, the X-P200 is equipped with a variety of inputs, including multiple line-level RCA inputs, allowing users to connect various sources such as CD players, tuners, and even digital audio players. The amplifier also features a headphone output, making it a versatile option for personal listening, while the built-in mute function adds convenience during use.

The construction of the X-P200 reflects a commitment to quality. Its robust chassis design minimizes resonance and external interference, ensuring that the components operate optimally. The amplifier's front panel features a sleek, minimalist aesthetic with simple controls that enhance usability without overwhelming the listener.

In summary, the Musical Fidelity X-P200 stands out as a powerful, versatile integrated amplifier that combines advanced amplification technologies with thoughtful design. It is an excellent choice for both casual listeners and serious audiophiles, providing a high-fidelity audio experience that truly captures the essence of the music. Whether used in a dedicated listening room or as part of a more extensive home audio setup, the X-P200 delivers performance and reliability, making it a worthwhile investment for any music enthusiast.
Top Page Image Contents