ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
Setup
SETTING UP THE L70
INPUT SELECTOR
•From the OSD’s <MAIN MENU> screen, select the <INPUT SELECTOR> menu item using the HTR L70
remotes’ and “Enter” keys.
• Using the keys select the video input (DVD, SAT, VCR, and VIDEO 4) you wish to configure.
•Use the keys to move to the <Audio> line, and then use the keys to select the analog audio input you wish to be linked to that input (usually, this will be the same, i.e., “VCR” with “VCR,” “Video 4” with “Video 4,” and so on).
NOTE
It is not necessary to have an analog audio input connected for every video input you employ. In fact, in some
•Now use the keys to move to the <DIGITAL INPUT> line and select the digital input you wish linked to that input.
•If you set <DIGITAL INPUT> to “ANALOG,” no incoming digital signal will be selected by that input. (Set an input’s <DIGITAL INPUT> to “ANALOG” only if you wish to ensure that that input will not play an incoming digital bit stream, even if one is present.)
NOTE
•The combination of
•That signals from digital inputs are not available on the analog VCR OUT jacks.
12