Reference

TROUBLESHOOTING

Check the following guide for the possible cause of a problem before contacting service.

SYMPTOM

CAUSE

 

CORRECTION

No power.

• The power cord is disconnected.

• Plug the power cord into the wall outlet securely.

 

 

 

 

 

 

The power is on, but the DVD player does not

• No disc is inserted.

• Insert a disc. (Check that the DVD or, audio CD

 

 

indicator in the display window is lit.)

work.

 

 

 

 

 

 

 

 

No picture.

• The TV is not set to receive DVD signal output.

• Select the appropriate video input mode on the

 

 

TV so the picture from the DVD player appears

 

 

 

 

 

 

on the TV screen.

 

 

 

 

• The video cable is not connected securely.

• Connect the video cable securely.

 

 

 

 

• The connected TV power is turned off.

• Turn on the TV.

 

 

 

No sound.

• The equipment connected with the audio cable

• Select the correct input mode of the audio

is not set to receive DVD signal output.

 

receiver so you can listen to the sound from the

 

 

 

 

 

DVD player.

 

 

 

 

• The audio cables are not connected securely.

• Connect the audio cable securely.

 

 

 

 

• The power of the equipment connected with the

• Turn on the equipment connected with the

 

audio cable is turned off.

 

audio cable.

 

 

 

 

• The Digital Audio Output is set to the wrong

• Set the Digital Audio Output to the correct

 

position.

 

position, then turn on the DVD player again by

 

 

 

pressing ON.

 

 

 

 

The playback picture is poor.

• The disc is dirty.

Clean the disc.

 

 

 

 

 

 

The DVD player does not start playback.

• No disc is inserted.

• Insert a disc. (Check that the DVD or audio CD

 

 

indicator in the DVD display is lit.)

 

 

 

 

 

 

 

• An unplayable disc is inserted.

• Insert a playable disc. (Check the disc type, color

 

 

 

system, and Regional code.)

 

 

 

 

• The disc is placed upside down.

• Place the disc with the playback side down.

 

 

 

 

• The disc is not placed within the guide.

• Place the disc on the disc tray correctly inside the

 

 

 

guide.

 

 

 

 

 

• The disc is dirty.

Clean the disc.

 

 

 

 

• The Rating level is set.

• Cancel the Rating function or change the rating

 

 

 

level.

 

 

 

The remote control does not work properly.

• The remote control is not pointed at the remote

• Point the remote control at the remote sensor of

sensor of the DVD player.

 

the DVD player.

 

 

 

 

 

 

• The remote control is too far from the DVD

• Operate the remote control within 23 ft (7 m).

 

player.

 

 

 

 

 

 

 

• There is an obstacle in the path of the remote

Remove the obstacle.

 

control and the DVD player.

 

 

 

• The batteries in the remote control are

• Replace the batteries with new ones.

 

exhausted.

 

 

 

 

 

 

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

25

Page 25
Image 25
NAD T 513 owner manual Troubleshooting, Symptom Cause Correction