NAD T 513 Connections, Connecting to a TV, Video Connection, Progressive Scan Connection

•Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below.

•Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

•For better sound reproduction, connect the player’s AUDIO OUT connectors to the audio in connectors of your amplifier, receiver, stereo or audio/video equipment. See “Connecting to Optional Equipment” on page 10.

CAUTION

•Make sure the DVD Player is connected directly to the TV. Tune the TV to the correct video input channel.

•Do not connect the DVD Player’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.

•Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection system.

CONNECTING TO A TV

•Make one of the following connections, depending on the capabilities of your existing equipment.

VIDEO CONNECTION

1Connect the VIDEO OUT jack on the DVD Player to the video in jack on the TV using the video cable (V).

2Connect the Left and Right AUDIO OUT connectors of the DVD Player to the audio left/right in connectors on the TV using the audio cables (A).

S-VIDEO CONNECTION

1Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S).

2Connect the Left and Right AUDIO OUT connectors of the DVD Player to the audio left/right in connectors on the TV using the audio cables (A).

COMPONENT VIDEO (COLOR STREAM®) CONNECTION

1Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN connectors on the DVD Player to the corresponding in connectors on the TV using an Y / Pb / Pr cable (C).

2Connect the Left and Right AUDIO OUT connectors of the DVD Player to the audio left/right in connectors on the TV using the audio cables (A).

Introduction

CONNECTIONS

PROGRESSIVE SCAN CONNECTION

•If your television is a high-definition or “digital ready” television, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player.

1Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN connectors on the DVD Player to the corresponding in connectors on the TV using an optional Y Pb Pr cable (C).

2Connect the Left and Right AUDIO OUT connectors of the DVD Player to the audio left/right in connectors on the TV using the supplied audio cables (A).

NOTES

•Set the Progressive to “On” on the setup menu for progressive signal, see page 13.

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack).

Rear of TV

PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

Rear of DVD player

SVENSKA

9