Operation

WHT Handheld Microphone Transmitter

1.Unscrew the BATTERY COMPARTMENT COVER (12) and remove, exposing the BATTERY HOLDER (13).

Insert a fresh 9V ALKALINE BATTERY (14), observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely. A fresh alkaline battery can last up to 15 hours in use, but in order to ensure optimum performance, it is recommended that you replace the battery after every ten hours of use.

2.Turn on the WHT by sliding the OFF/STANDBY/ON SWITCH (15) to the STANDBY position (transmitter on, audio muted) or the ON position (transmitter and audio both on). The BATTERY INDICATOR LED (16) will give a single quick flash, indicating usable battery strength. In the case of a dead or low battery, the LED will either not go on at all or will stay on continuously, indicating that the battery should be replaced with a fresh one. To preserve battery life, turn the transmitter off when not in use.

3.The microphone is now ready to use. The TX LED INDICATOR (7) on the 401X QUAD receiver should now be lit, indicating a received signal from the transmitter. When ready to speak, slide the transmitter switch to the ON position. Adjust the volume of the receiver as per the Audio Output

Microphone Connection section of the above 401X QUAD receiver instructions. The AF LEVEL LED DISPLAY (7) on the 401X QUAD receiver will light up as if the input signals are getting stronger.

Occasional flickering on and off during use of the LED indicator is normal. However, if the LED stays on continuously, it means the signal is too loud and there is the possibility of overload distortion. If this occurs, back off from the microphone until the red LED indicator only flickers on peaks.

[Note: Observe care in selecting PA volume, transmitter location and speaker placement so that acoustic feedback (howling or screeching) will be avoided.]

[Note: Microphone elements can easily be destroyed by the buildup of salts and minerals from perspiration and saliva. It is good practice to put a windscreen on the mic element at all times to protect it.]

16

15

13

14

12

5

Page 4 Page 6
Page 5
Image 5
Nady Systems 401XQLTOSYSAB, 401XQ2HT2LTE4FHE, 401XQUADLTE4F owner manual WHT Handheld Microphone Transmitter
Page 4 Page 6

401XQLTOSYSAB, 401XQUADLTE4F, 401XQ2HT2LTE4FHE specifications

Nady Systems has consistently pushed the boundaries of wireless audio technology, and their latest offerings, the 401XQ2HT2LTE4FHE, 401XQUADLTE4F, and 401XQLTOSYSAB, exemplify this commitment to quality and innovation. These systems are designed for both professional and semi-professional applications, making them suitable for a wide range of users, from musicians to public speakers.

The 401XQ2HT2LTE4FHE model stands out with its dual-channel capability. It allows for two simultaneous transmissions, making it an ideal choice for performances that require multiple users on stage. This model is equipped with advanced digital processing technology, ensuring a clear and interference-free signal. The rechargeable battery system provides hours of operation, which is crucial for long events or performances.

In addition to the 401XQ2HT2LTE4FHE, the 401XQUADLTE4F offers a unique four-channel system, allowing for even greater flexibility. This model is particularly beneficial for larger ensembles or events where multiple microphones are needed. Each channel operates independently, making it easy to mix various audio sources without interference. It also includes built-in advanced signal processing, which helps to eliminate background noise and enhances audio clarity, ensuring that audiences receive the best sound quality possible.

The 401XQLTOSYSAB is designed with scalability in mind. Its modular design allows for easy expansion, which is a significant advantage for users who might need to upgrade their system in the future. This model comes with a variety of wireless frequencies, enabling users to select the best channels for their needs, thus minimizing the risk of interference in crowded venues.

All three models feature robust construction, designed to withstand the rigors of frequent use. They have easy-to-read displays for monitoring battery levels and signal strength, which is vital during live performances. Additionally, comprehensive user manuals and support ensure that users can set up and troubleshoot their systems quickly and efficiently.

Overall, Nady Systems' 401X series signifies a leap forward in wireless audio technology, combining flexibility, usability, and outstanding performance. Whether for a solo artist, a band, or a public speaking event, these systems provide the quality and reliability needed in today's fast-paced audio environments.
Top Page Image Contents