Operation

WGT Instrument Bodypack Transmitter

1.Snap open the BATTERY COMPARTMENT (25) and insert a fresh 9V BATTERY (26), observing the correct polarity. Close the compartment. The WGT-15 is provided with a 3.5 mm LOCKING JACK (27) for connecting the INSTRUMENT CABLE (28). To secure the connection, turn the metal slip ring on the plug clockwise to thread it on to the jack. To unplug, reverse the process. Slip the transmitter into a pocket or clip on to your clothes or instrument strap.

[Note: As the cord to the instrument also serves as the antenna, be sure to extend it fully for maximum range. Rolling up or shortening the cord may reduce the effective operating range.]

2.Turn on the WGT by sliding the OFF/STANDBY/ON SWITCH (29) to the STANDBY position (transmitter on, audio muted) or the ON position (transmitter and audio both on). The BATTERY INDICATOR LED (30) will give a single quick flash, indicating usable battery strength. In the case of a dead or low battery, the LED either will not go on at all or will stay on continuously, indicating that the battery should be replaced with a fresh one.

3.The WGT transmitter is now ready to use. The TX DISPLAY LEDs (7) on the 401X QUAD receiver should now be lit, indicating a received signal from the transmitter. Adjust the volume of the receiver as per the Audio Output Instrument Connections section of the above 401X QUAD receiver instructions. The AF LEVEL LED DISPLAY (7) on the 401X QUAD receiver will light up as if the input signals are getting stronger. Occasional flickering on and off during use of the LED indicator is normal. However, if the LED stays on continuously, turn down the instrument volume control or noticeable distortion may result. For ultra high-gain instrument sources such as active bass pickups or even extra hot guitar pickups, an attenuation pad may be required to eliminate unwanted distortion.

[Note: The INPUT LEVEL CONTROL (31) is not operable because it is preset and switched internally at the factory to instrument GT input mode. The control is only used for Headworn Mic (HM) and Lavalier (LT) input modes.]

[Note: Scratchy noises can sometimes occur when some electric guitars/basses with dirty pots or connections are used with any wireless system. For this reason, the supplied INSTRUMENT CORD (28) has a factory installed capacitor inside the ¼” plug. This capacitor provides first order filtering of the RF signal from the cord into the guitar and eliminates virtually all scratchy noises. Should your equipment still produce scratchy noises, we suggest these steps to eliminate them:

1) Make sure all guitar volume and tone pots are clean and all contacts are solid— this is very important.

2) Provide extra filtering with a 220 pF capacitor soldered across the hot to ground terminals of the guitar’s volume and tone pots.)

8

Page 7 Page 9
Page 8
Image 8
Nady Systems 401XQLTOSYSAB, 401XQ2HT2LTE4FHE, 401XQUADLTE4F owner manual WGT Instrument Bodypack Transmitter
Page 7 Page 9

401XQLTOSYSAB, 401XQUADLTE4F, 401XQ2HT2LTE4FHE specifications

Nady Systems has consistently pushed the boundaries of wireless audio technology, and their latest offerings, the 401XQ2HT2LTE4FHE, 401XQUADLTE4F, and 401XQLTOSYSAB, exemplify this commitment to quality and innovation. These systems are designed for both professional and semi-professional applications, making them suitable for a wide range of users, from musicians to public speakers.

The 401XQ2HT2LTE4FHE model stands out with its dual-channel capability. It allows for two simultaneous transmissions, making it an ideal choice for performances that require multiple users on stage. This model is equipped with advanced digital processing technology, ensuring a clear and interference-free signal. The rechargeable battery system provides hours of operation, which is crucial for long events or performances.

In addition to the 401XQ2HT2LTE4FHE, the 401XQUADLTE4F offers a unique four-channel system, allowing for even greater flexibility. This model is particularly beneficial for larger ensembles or events where multiple microphones are needed. Each channel operates independently, making it easy to mix various audio sources without interference. It also includes built-in advanced signal processing, which helps to eliminate background noise and enhances audio clarity, ensuring that audiences receive the best sound quality possible.

The 401XQLTOSYSAB is designed with scalability in mind. Its modular design allows for easy expansion, which is a significant advantage for users who might need to upgrade their system in the future. This model comes with a variety of wireless frequencies, enabling users to select the best channels for their needs, thus minimizing the risk of interference in crowded venues.

All three models feature robust construction, designed to withstand the rigors of frequent use. They have easy-to-read displays for monitoring battery levels and signal strength, which is vital during live performances. Additionally, comprehensive user manuals and support ensure that users can set up and troubleshoot their systems quickly and efficiently.

Overall, Nady Systems' 401X series signifies a leap forward in wireless audio technology, combining flexibility, usability, and outstanding performance. Whether for a solo artist, a band, or a public speaking event, these systems provide the quality and reliability needed in today's fast-paced audio environments.
Top Page Image Contents