
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.
Item
Description
Using the ▲/▼ buttons turns on/off the automatic signal search | ||
function. |
|
|
ON OFF |
|
|
When the ON is selected, detecting no signal automatically cycles | ||
through input ports in the following order. The search is started from | ||
AUTO SEARCH the current port. Then when an input is found, the projector will stop | ||
searching and display the image. |
| |
COMPUTER IN1 | COMPUTER IN2 | LAN USB TYPE A |
VIDEO |
| USB TYPE B |
•It may take several seconds to project the images from the USB TYPE B port.
| Using the ▲/▼ buttons turns on/off the DIRECT POWER ON |
| function. |
| ON OFF |
| When set to the ON, the lamp in projector will be automatically turned |
DIRECT POWER | on without the usual procedure ( 19), only when the projector is |
supplied with the power after the power was cut while the lamp was on. | |
ON | • This function does not work as long as the power has been |
| supplied to the projector while the lamp is off. |
•After turning the lamp on by the DIRECT POWER ON function, if neither input nor operation is detected for about 30 minutes, the
projector is turned off, even though the AUTO POWER OFF function (56) is disabled.
(continued on next page)
55