Internal temperature is rising, 106

Troubleshooting

Related messages (continued)

Message

Description

The internal temperature is rising.

Please turn the power off, and allow the projector to cool down at least 20 minutes. After having conﬁrmed the following items, please turn the power ON again.

•Is there blockage of the air passage aperture?

•Is the air ﬁlter dirty?

•Does the peripheral temperature exceed 35°C?

•Is the projector used at an altitude of about 1600 m or higher? If the projector is used at an altitude of about 1600 m

or higher, set FAN SPEED of the SERVICE item in the OPTION menu to HIGH (60).

A note of precaution when cleaning the air ﬁlter. Please immediately turn the power off, and clean or change the air ﬁlter referring to the “Cleaning and replacing the air ﬁlter” section of this manual. After you have cleaned or

changed the air ﬁlter, please be sure to reset the ﬁlter timer (57, 100).

The button operation is not available.

106

Page 108

Image 108

Dukane 8107HWI user manual Internal temperature is rising, Button operation is not available, 106

Contents

Model 8107HWI Page About this manual ProjectorThank you for purchasing this projector Trademark acknowledgment Contents Features Checking the contents of package Part names ProjectorHOT Small Control panel STANDBY/ON button Buttons Focus +/- buttonsHdmi Computer IN2 1415 Down button Volume + button Computer buttonMY Button 1 button MY Button 2 button Keystone button Zoom button Zoom + button Position button 26 Setting up Arrangement Arrangement Connecting with your devices About Plug-and-Play capability VCR/DVD/Blu-ray Disc Player Computer Connecting with your devices Monitor Microphone system USB storage Device Access point Computer Hdmi Connecting to a power supply Using the security bar and slotSecurity bar Anti-theft chain or wire Security slot Using the cable cover Remote control Installing the batteriesAbout the remote control signal Hitachi MAXELL, Part No.LR6 or R6P Changing the frequency of remote control signal Using as a simple PC mouse & keyboardUSB Type B port Installing the battery Interactive penExchanging the tip of the pen Hitachi MAXELL, Part No. LR03 Power on/off Turning on the powerPower indicator STANDBY/ON button Turning off the power Adjusting the volume Selecting an input signalOperating Temporarily muting the sound Press the MY Source / DOC. Camera button on Computer buttonVideo button MY Source Searching an input signal For a computer signalFor an Hdmi TM signal Selecting an aspect ratio Adjusting the projectors elevator Adjusting the zoom and focusZoom button Zoom + button Using the automatic adjustment feature For a video signal and s-video signalFor a component video signal Focus button Adjusting the position Correcting the keystone distortionsPosition button Keystone button Using the magnify feature Magnify ON/OFF button Temporarily freezing the screen Temporarily blanking the screenFreeze button Blank button Using the menu function ESC button Reset buttonAdvanced Menu Enter button Indication in OSD On Screen Display Indication Meaning Description InteractiveAspect Zoom Picture Mode ECO ModeReset Mirror Interactive menu Picture menu BrightnessContrast Gamma Custom MID LOWCustom Color Sharpness PresentationOFF Active Iris For a computer signal For an Hdmitm signalImage menu Signal, the range of this adjustment depends on Over Scan Selected will reset the H Position to the default settingPosition USB Type B or Hdmi port Phase Auto AdjustSize Execute Input menu TV Film OFFHigh MID LOW Video NR Video Format Hdmi FormatHdmi Range Auto Sync on G OFF ComputerFrame Lock Resolution Setup menu ShiftLeft MID Right No Input is Detected Sync is OUT of Range Invalid Scan Freq Perfect FIT Input button On OFF Normal ECO Normal Hinvert VinvertNormal Saving Volume Audio menuSpeaker Audio Source MIC Volume Hdmi AudioMIC Level High LOW Screen menu English Français Deutsch Español Capturing error has occurred. Please try again MyScreenMyScreen registration is ﬁnished MyScreen Lock Message Source Name Template Description Closed Caption DisplayMode Channel Direct Power Option menuComputer IN2 LAN USB Type a Video Video Hdmi USB Type B Auto Power OFFMouse USB Display USB Type B Cancel OK CancelLamp Time MY Button No Messenger Data appears Active Iris Changes the active iris mode Picture Mode Changes the Picture ModeZoom Turns the D-ZOOM mode on/off. When the D-ZOOM Mode is on, use the / cursor buttons to adjust Service FAN SpeedGhost Filter Message KEY Lock Lens Door LockLens Door Open Lens Door Close Remote Freq 1NORMAL 2HIGHControl port Serial Settings Baud Rate ServiceCommunication Type Parity Response Limit Time Transmission Method Factory Reset Information Setup Network menuDhcp Default Setup GatewayIP Address Subnet Projector Name MY Image AMX D.D Quit PresenterPresentation Section Switching Multi PCUser Name Guide Password Security menuEnter to the Security menu Security Turning on the MyScreen Password Turning off the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN code Transition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password MY Text Writing Presentation tools Interactive FunctionSystem requirements Application Interactive Function Connection during use Using the pen Preliminary preparation Basic pen operation Customizing the pen Using StarBoard Software PC-LESS Presentation Supported storage mediaSupported format Supported ﬁle format Thumbnail mode Thumbnail menu Selected image Thumbnail images Setup menu for the selected image Operating by buttons or keysDown Enter Input Operating by the menu on the Thumbnail screen PC-LESS Presentation Full Screen Mode Slideshow mode Control Projector Software Play Playlist Example of playlist.txt ﬁles USB Display Hardware and software requirement for computerUSB Port USB cable 1 piece Right-Click menu Floating menu Options window Maintenance Replacing the lampType number 456-8104HW Replacing the lamp High Voltage High Temperature Lamp warning Cleaning and replacing the air ﬁlter Type number UX37191 Filter setStitched side On next Cleaning and replacing the air ﬁlter 100 Replacing the internal clock battery Hitachi MAXELL, part number CR2032 or CR2032H101 Cleaning cloth 102 Caring for the cabinet and remote control Maintenance of the pen sensors hornsMaintenance of the pen Inside of the projector Other care 104 Troubleshooting There is no input signalAn improper signal is input Related messages Internal temperature is rising Button operation is not available106 Regarding the indicator lamps It is time to clean the air ﬁlter There is a possibility that the interior portionHas become heated Lens door is not opened properly Resetting all settings Signal cables are not correctly connected Volume is adjusted to an extremely low levelAudio SOURCE/SPEAKER setting is not correct Mode selected for Hdmi Audio is not suitable Color settings are not correctly adjusted Color Space setting is not suitableProjector is operating in Eco mode Frame Lock function cannot work on the current Input signal Computer cannot start up in the current hardware Saving function is workingCommunication Type for the Control port is Set to Network Bridge Is the use of USB cables disabled? Is the power of the projector turned on?Is the USB cable connected correctly? Is the system started up in the correct sequence? This may be due to poor contact of the battery Has the battery run out?Are you using more than one pen at the same time? Is the volume from the speaker of the projector too loud? StarBoard Software ﬁles may be corrupted, or Is the tip of the pen worn out?Is alignment of the pen position correctly performed? Is the projector inclined? Is the projector correctly installed? Is a part of the image enlarged using the Magnify Function?Is the computer image projected within the area Screen? Speciﬁcations End User License Agreement for the Projector Software117