IMAGE menu

IMAGE menu

From the IMAGE menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

Using the ▲/▼ buttons switches the mode for aspect ratio.

For a computer signal

NORMAL 4:3 16:9 16:10 NATIVE

For an HDMITM signal

NORMAL 4:3 16:9 16:10 14:9 NATIVE

ASPECT

For a video signal, s-video signal or component video signal

4:3 16:9 16:10 14:9 NATIVE

For an input signal from the LAN, USB TYPE A or USB TYPE B port, or if there is no signal

16:10 (fixed)

• The NORMAL mode keeps the original aspect ratio of the signal.

Using the ◄/► buttons adjusts the over-scan ratio.

Small (It magnifies picture)

Large (It reduces picture)

This item can be selected only for a video, s-video and component video signal.

OVER SCAN • For an HDMITM signal, this item can also be selected if either (1) or

(2) applies.

(1)HDMI FORMAT item in the INPUT menu is set to VIDEO.

(2)HDMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals.

(continued on next page)

37

Page 39
Image 39
Dukane 8107HWI user manual Image menu, For a computer signal, For an Hdmitm signal