Dukane 8107HWI user manual Description, Eco Mode, Mirror, will be displayed when

SETUP menu

Item

Description

Using the ▲/▼ buttons changes the eco mode setting.

	NORMAL	ECO
ECO MODE	• When the ECO is selected, acoustic noise and screen brightness
	are reduced.
	• When AUTO ECO MODE ( 45) is set to ON, the projector will
	always be set to Eco mode at start-up regardless this setting.
	Using the ▲/▼ buttons switches the mode for mirror status.
MIRROR	NORMAL	H:INVERT V:INVERT	H&V:INVERT
	If the Transition Detector is on and MIRROR status is changed,
	TRANSITION DETECTOR ON alarm (		76) will be displayed when
	projector is restarted after the AC power is turned off.

Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING.

NORMAL SAVING

When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below:

•When SAVING is selected, the RS-232C communication control except to turn the projector on and the network function are disabled

STANDBY MODE while the projector is in the standby mode. If the COMMUNICATION
TYPE in the COMMUNICATION menu is set to NETWORK
BRIDGE, all of the RS-232C commands are disabled (	63).

•When SAVING is selected, STANDBY setting of AUDIO SOURCE (47) is invalid, and no signal is output from AUDIO OUT port in the standby mode.

•When SAVING is selected, STANDBY setting of MONITOR OUT is invalid, and no signal is output from MONITOR OUT port in the standby mode.

While the image signal from the input port chosen in step (1) is projected, the image signal from the input port selected in step (2) is output to MONITOR OUT port.

(1)Choose a picture input port using ▲/▼ buttons. Choose STANDBY to select the picture output in the standby mode.

MONITOR OUT (2) Select one of the COMPUTER IN ports using ◄/► buttons.

Select OFF to disable the MONITOR OUT port for the input port or standby mode chosen in the step (1).

•You cannot select COMPUTER IN1 in step (1) and COMPUTER IN2 in step (2) and vice versa.

46