Dukane 8107HWI user manual AUDIO menu

AUDIO menu

AUDIO menu

From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.

Item				Description
VOLUME	Using the ◄/► buttons adjusts the volume.
		Low	High
	Using the ▲/▼ buttons turns on/off the built-in speaker.
SPEAKER		ON	OFF
	When OFF is selected, the built-in speaker does not work.
	While the image signal from the input port chosen in step (1) is
	projected, the audio signal from the input port selected in step
	(2) is output to both the AUDIO OUT port and built-in speaker of
	this projector. However, the built-in speaker does not work when
	SPEAKER is set to OFF.
	(1) Choose a picture input port using the
		▲/▼ buttons.
		Choose STANDBY to select the sound
		output in the standby mode.
	(2) Select one of the AUDIO IN ports using
		◄/► buttons.
AUDIO SOURCE		Select		to mute the sound from the
		input port or in the standby mode chosen in the step (1).
	• In the AUDIO SOURCE window, “H” symbolizes the audio signal
	from the HDMI port. It can be selected only for the picture input from
	the HDMI port.
	• Even if the projector is in the standby mode, cooling fans may
	work and make noises when the built-in speaker is in operation.
	• C.C. (Closed Caption) is automatically activated when				is selected
	and an input signal containing C.C. is received. This function is
	available only when the signal is NTSC for VIDEO or S-VIDEO, or
	480i@60 for COMPUTER IN1 or COMPUTER IN2, and when AUTO
	is selected for DISPLAY in the C.C. menu under the SCREEN menu
	(	54).

(continued on next page)

47