Dukane 8107HWI user manual Using the magnify feature, Magnify ON/OFF button

Using the magnify feature

1. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the picture will be zoomed by 1.5 times. On the dialog, triangle marks to show each direction will be displayed.

2. The display magnification of the projector switches in order with every press of the MAGNIFY button.

Operating

MAGNIFY ON/OFF button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGEVOLUME

UP

ON

DOWN

OFF

For computer signals, HDMI TM (RGB) signals, input signals from the LAN or USB TYPE B port

1.5 times 2 times 3 times 4 times 1 time

For video signals, s-video signals, component video signals or HDMITM (Component) signals

1.5times 2 times 1 time

3.While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor buttons to shift the magnifying area.

4.Press the MAGNIFY OFF button on the remote control to exit magnification.

●The MAGNIFY dialog will automatically disappear in several seconds with no operation. The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared.

●The magnification is automatically disabled when the displaying signal or its display condition is changed.

●While the magnification is active, the keystone distortion condition may vary. It will be restored when the magnification is disabled.

●Some horizontal stripes might be visible on the image while magnification is active.

●This function is not available in the following cases:

-A sync signal in the range not supported is input.

-There is no input signal.

27