OPTION menu
Item
Description
| Using the ▲/▼ buttons adjusts the time to count down to |
| automatically turn the projector off. |
| Long (max. 99 minutes) Short (min. 0 minute = DISABLE) |
AUTO POWER | When the time is set to 0, the projector is not turned off automatically. |
OFF | When the time is set to 1 to 99, and when the passed time with no- |
| signal or an unsuitable signal reaches at the set time, the projector |
| lamp will be turned off. |
| If one of the projector's buttons or the remote control buttons |
| is pressed or one of the commands (except get commands) is |
| transmitted to the CONTROL port during the corresponding time, |
| projector will not be turned off. |
| Please refer to the section “Turning off the power” ( 20). |
| Using the ▲/▼ buttons selects the function of USB TYPE B port. |
| To use this function, you need to connect the USB TYPE B port of |
| the projector and the type A USB port of a computer. |
| MOUSE USB DISPLAY |
| MOUSE : The accessory remote control works as the simple mouse |
| and keyboard of the computer. |
| USB DISPLAY : The port works as an input port that receives image |
| signals from the computer ( 94). |
| • It may take several seconds to project the images from the USB |
USB TYPE B | TYPE B port. |
| • In the following cases, a message to notify you that USB TYPE B |
| port is not available for picture input appears together with the USB |
| TYPE B dialog: |
| - This setting is switched to MOUSE while a picture input from the |
| USB TYPE B port is projected. |
| - The USB TYPE B port is selected as the picture input source while |
| this setting is set to MOUSE. Select USB DISPLAY in the dialog to |
| project the picture input to the USB TYPE B port. In this case, you |
| cannot use the simple mouse and keyboard function. Otherwise |
| select other port for picture input. |
(continued on next page)
56
