INPUT menu
Item |
| Description | |
|
|
| |
| The computer input signal type for COMPUTER IN1 and IN2 ports | ||
| can be set. |
| |
| (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. | ||
| (2) Use the ◄/► buttons to select | ||
| the computer input signal type. | ||
| AUTO | SYNC ON G OFF | |
COMPUTER IN | • Selecting the AUTO mode allows | ||
| you to input a sync on G signal or component video signal from the | ||
| port. Please refer to “Technical” for the connection of component | ||
| video input to COMPUTER IN1/2 port. | ||
| • In the AUTO mode, the picture may be distorted with certain | ||
| input signals. In such a case, remove the signal connector so that | ||
| no signal is received and select the SYNC ON G OFF, and then | ||
| reconnect the signal. | ||
| Set the frame lock function on/off for each port. | ||
| (1) Use the ▲/▼ buttons to select | ||
| the input ports. | ||
| (2) Use the ◄/► buttons to turn the | ||
FRAME LOCK | frame lock function on/off . | ||
ON | OFF | ||
| |||
| • This item can be performed only on a signal with a vertical | ||
| frequency of 49 to 51Hz, 59 to 61 Hz. | ||
| • When ON is selected, moving pictures are displayed more | ||
| smoothly. |
| |
(continued on next page) |
| ||
42
