Introduction
Congratulations for purchasing the
The
•Highly accurate SPL meter with 2 level ranges measuring between 30dB and 130dB @ 32Hz - 8KHz
•Full professional features include
•Uses 9VDC alkaline battery with up to 50 hours battery life
•Foam windscreen, sturdy vinyl carrying case, and battery included
Contents |
|
Introduction | 2 |
Controls | 3 |
Battery Replacement | 5 |
Operation Precautions | 5 |
Measurement | 5 |
Calibration Procedures | 6 |
Specifications | 7 |
| 2 |
DSM1_manual_book |
Specifications
Standard applied | IEC651 type 2, ANSI S1.4 type 2 |
Frequency range | 31.5Hz~8KHz |
Measuring level range | 30~130dB |
Frequency weighting | A/C |
Microphone | 1/2 inch electret condenser microphone |
Calibration | Electrical calibration with the internal oscillator (1kHz sine wave) |
Display | LCD |
Digital display | 4 digits |
Resolution | 0.1dB |
Display Up data | 0.5 sec. |
Time weighting | FAST(125mS), SLOW(1 sec.) |
Level ranges | Lo: |
Accuracy | + 1.5dB (under reference conditions) |
Alarm function | “OVER” is show when input is out of range |
Maximum hold | Hold readings the Maximum Value, with decay < 1dB/3minutes. |
Auto power off | Meter automatically shuts down after approx. 15 minutes of inactivity. |
Power supply | One 9V battery, 006P or IEC 6F22 or NEDA 1604. |
Power life | About 50hrs(alkaline Battery) |
Operation temperature | 0 to 40 Ohms (32 to 104 °F) |
Operation humidity | 10 to 90%RH |
Storage temperature | |
Storage humidity | 10 to 75%RH |
Dimensions | 8.3” x 2.2” x 1.3” (210 x 55 x 32 mm) |
Weight | 8.01 oz (230g) (including battery) |
7
1/21/32, 10:55 PM